AR-M237 AR-M277 - Pitney Bowes Canada

More documents

Recommendations

Info

TROUBLESHOOTING AND MAINTENANCE MISFEED IN THE UPPER EXIT AREA (when a job separator tray kit or finisher (AR-FN5N) is installed) If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area. 1 2 70 Open the upper right side cover. Gently pull the misfed paper out. Be careful not to tear the misfed paper during removal. MISFEED IN AN OUTPUT TRAY (when a finisher (AR-FN5N) is installed) 1 A MISFEED HAS OCCURRED. INFORMATION Grasp the handle of the stapler compiler cover and pull to open the cover. 3 2 Close the upper right side cover. Make sure that the misfeed message is cleared. Remove any misfed paper from the transport area.
3 4 5 6 If staple sort copying is being performed, open the paper guide and remove any misfed paper from the stapler compiler. Close the stapler compiler cover. If the offset tray is being used, remove any misfed paper from the offset tray. If the top tray is being used, open the top cover, remove any misfed paper, and close the top cover. Make sure that the misfeed message is cleared. TROUBLESHOOTING AND MAINTENANCE 71 5
Page 1 and 2:
MODEL AR-M237 AR-M277 DIGITAL MULTI
Page 3 and 4:
CONTENTS CAUTIONS..................
Page 5 and 6:
CAUTIONS Follow the cautions below
Page 7 and 8:
ENVIRONMENTAL INFORMATION As an ENE
Page 9 and 10:
MAIN FEATURES High-speed laser copy
Page 11 and 12:
Interior 15 16 17 18 19 20 21 22 23
Page 13 and 14:
TOUCH PANEL Using the touch panel [
Page 15 and 16:
POWER ON AND OFF The power switch i
Page 17 and 18:
LOADING PAPER When a tray runs out
Page 19 and 20:
LOADING PAPER BEFORE USING THE MACH
Page 21 and 22: BEFORE USING THE MACHINE CHANGING A
Page 23 and 24: 2 Chapter 2 COPY FUNCTIONS This cha
Page 25 and 26: COPYING FROM THE RSPF 1 2 3 4 Note
Page 27 and 28: Copying originals of mixed length (
Page 29 and 30: AUTOMATIC TWO-SIDED COPYING Two ori
Page 31 and 32: EXPOSURE ADJUSTMENT SELECTING THE O
Page 33 and 34: MANUAL RATIO SELECTION There are fo
Page 35 and 36: 4% 0% 4 5 6 Touch the [X] key. X Y
Page 37 and 38: 3 Chapter 3 CONVENIENT COPY FUNCTIO
Page 39 and 40: STAPLE SORT (when the finisher (AR-
Page 41 and 42: SPECIAL MODES When the [SPECIAL MOD
Page 43 and 44: MARGIN SHIFT COPY CONVENIENT COPY F
Page 45 and 46: DUAL PAGE COPY CONVENIENT COPY FUNC
Page 47 and 48: JOB BUILD MODE CONVENIENT COPY FUNC
Page 49 and 50: ORIGINAL SIZE CONVENIENT COPY FUNCT
Page 51 and 52: L 1 2 Touch the key and then touch
Page 53 and 54: 4 Chapter 4 USER SETTINGS CUSTOM SE
Page 55 and 56: SETTINGS Total count The total page
Page 57 and 58: EXECUTING A JOB PROGRAM S 1 2 Press
Page 59 and 60: 5 Chapter 5 TROUBLESHOOTING AND MAI
Page 61 and 62: SELECTED PAPER TRAY IS OUT OF SERVI
Page 63 and 64: Original size is not selected autom
Page 65 and 66: Image quality problems TROUBLESHOOT
Page 67 and 68: MISFEED IN THE RSPF 1 Remove the mi
Page 69 and 70: 4 Close the front cover and side co
Page 71: MISFEED IN THE LOWER PAPER TRAY TRO
Page 75 and 76: STAPLE CARTRIDGE REPLACEMENT (when
Page 77 and 78: CLEANING THE MACHINE DOCUMENT GLASS
Page 79 and 80: FINISHER (AR-FN5N) PERIPHERAL DEVIC
Page 81 and 82: STORAGE OF SUPPLIES Standard suppli
Page 83 and 84: Gradation Scanning: 256 Printing: 2
Page 85 and 86: MATERIAL SAFETY DATA SHEET Data Rev
Page 87 and 88: MATERIAL SAFETY DATA SHEET Data Rev
Page 89 and 90: MATERIAL SAFETY DATA SHEET Data Iss
Page 91 and 92: MATERIAL SAFETY DATA SHEET Data Iss
Page 93 and 94: H Handles .........................
Page 95 and 96: Preparations Bypass tray, loading p
Page 97 and 98: MEMO
Page 99 and 100: For users in the USA This device co
show all

AR-M237 AR-M277 - Pitney Bowes Canada

Create successful ePaper yourself

Delete template?

Save as template?