AR-M237 AR-M277 - Pitney Bowes Canada
AR-M237 AR-M277 - Pitney Bowes Canada
AR-M237 AR-M277 - Pitney Bowes Canada
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TROUBLESHOOTING AND MAINTENANCE<br />
MISFEED IN THE BYPASS TRAY<br />
1 Carefully pull the misfed paper out. 2<br />
MISFEED IN THE MACHINE<br />
Determine the location of the misfeed and remove it appropriately as indicated below.<br />
A. Misfeed in the paper feed area<br />
1<br />
2<br />
66<br />
If paper is misfed here, go to<br />
"A. Misfeed in the paper feed<br />
area" (below).<br />
Open the bypass tray and the side<br />
cover.<br />
Press gently on both sides of the front<br />
cover and pull it open.<br />
3<br />
Open and close the side cover.<br />
Make sure that the<br />
misfeed message is<br />
cleared.<br />
The message can also<br />
be cleared by opening<br />
and closing the front<br />
cover.<br />
If the message is not<br />
cleared, see "A. Misfeed<br />
in the paper feed area".<br />
Carefully remove the misfed paper.<br />
Turn the roller rotating knob in the<br />
direction of the arrow to assist in<br />
removing it.<br />
Roller rotating knob<br />
Warning<br />
Caution<br />
If paper is misfed, go to<br />
"B. Misfeed in the fusing<br />
area" (p.67).<br />
Be careful not to tear the<br />
misfed paper during<br />
removal.<br />
The fusing unit is hot. Do not touch<br />
the fusing unit when removing<br />
misfed paper. Doing so may cause a<br />
burn or injury.<br />
Do not touch the photoconductive drum<br />
(green portion) when removing the misfed<br />
paper. Doing so may damage the drum and<br />
cause smudges on copies.
Change language