Price List July 2012 - Knoll

Power distribution components for one side raceway panels
AutoStrada
description type h w d pattern no. list
Power rail for panel with one side only base
raceway (8 wire)
24 panel 2 6 2 RR3-E24S $145.
30 panel 2 12 2 RR3-E30S 175.
36 panel 2 18 2 RR3-E36S 191.
42 panel 2 24 2 RR3-E42S 207.
48 panel 2 30 2 RR3-E48S 212.
Power rail for panel with one side only base
raceway (10 wire)
24 panel 2 6 2 RR3-T24S 183.
30 panel 2 12 2 RR3-T30S 200.
36 panel 2 18 2 RR3-T36S 212.
42 panel 2 24 2 RR3-T42S 232.
48 panel 2 30 2 RR3-T48S 237.
Order Code
Example: RR3-T24S
RR3 Reff panel frame
raceway
T Ten wire, 3+3
24 for 24w panel
S Single sided raceway
Specification Information
Power rails are the primary power
distribution component. Each rail
provides provides outlet mounting
position on one side and receptacles
for branching power connectors at
each end.
Power rail for 24wide panel accepts
one duplex outlet or one power
infeed. Power rails for 30 to
48wide panels accept two outlets.
130
Application Notes
Power rails on this page are for use
with panels with one side raceway
only.
Power connections and duplexes as
required to be specified from
following pages for 8 or 10 wire as
required for panels with either one
sided base raceway or both sides
with base raceway.