Price List July 2012 - Knoll

Worksurface support
linking plate and cantilever for end counters
AutoStrada
description w d h pattern no. P1/P2 P3
Cantilever for end counters, fixed height 3 19 9 XTB1FCEND ( ) $227. $237.
Cantilever for end counters, adjustable height 3 19 9 -12 XTB1ACEND ( ) 250. 264.
Worksurface linking plate XTB1LP 31.
Order Code
Specification
Application Notes
Example: XTB1FCEND 613
XT Crinion Open Table
B1 Base components
FC Fixed height cantilever
END for end counter
613 Finish
Specify paint finish code after
pattern number.
Cantilever brackets are required to
support each end of worksurface.
Brackets attach to inserts on the
outside face of end legs for end
counters.
Fixed height cantilever supports for
end counter at 28 1 /2 H.
Adjustable cantilevers for end
counter enables end counter to be
set at 28 1 /2,29 1 /4 or 30 H.
A linking plate is recommended to
join adjacent worksurfaces that are
independently supported at the
same height. Specify two linking
plates at the junction of two
worksurfaces, or four total for each
end counter to two worksurfaces. A
linking plate is not required where
adjacent tops are supported by a
shared fixed height cantilever
bracket, as with complete fixed
height base assemblies. Linking
plates are recommended for
complete adjustable height base
assemblies in which tops are set at
the same height.
282