Price List July 2012 - Knoll

Service Wall frames
Standard and compact crown
AutoStrada
description type w d h pattern number black list
Wall frame, standard crown 39H 48 5 43 APF1 3948 $519.
60 5 43 APF1 3960 597.
72 5 43 APF1 3972 740.
48H 48 5 52 APF1 4848 572.
60 5 52 APF1 4860 654.
72 5 52 APF1 4872 816.
64H 48 5 68 APF1 6448 680.
60 5 68 APF1 6460 778.
72 5 68 APF1 6472 974.
Wall frame, compact crown 39H 48 5 40 APFA1 3948 416.
60 5 40 APFA1 3960 478.
72 5 40 APFA1 3972 589.
48H 48 5 49 APFA1 4848 456.
60 5 49 APFA1 4860 522.
72 5 49 APFA1 4872 653.
64H 48 5 65 APFA1 6448 544.
60 5 65 APFA1 6460 621.
72 5 65 APFA1 6472 778.
Acoustical inserts 39H 2 34 APA 39 30.
48H 2 43 APA 48 36.
64H 2 59 APA 64 48.
Order Code
Specification Information
Application
Example: APFA1 3948
APF Spine frame
A compact crown
1 Generation
39 Height
48 Width
Wall frame pattern numbers begin
with APF (standard crown) and
APFA (compact crown) prefixes.
Specify:
Fifth position: height
39 39H
48 48H
64 64H
Seventh position: width
48 48W
60 60W
72 72W
All Service Wall frames include 3
diameter, 2 levelling glides and one
set of connectors to adjacent frame
or wall connector. Frames are black
painted finish.
Service Wall frames are the
structural component of spine-based
planning. Specify frames in any
combination of widths to create the
overall wall length required.
Frames include vertical studs every
12 on center, with cover mounting
clips and cable manager inserts on
both sides. Frames also include 4H
or 1 top crown with continuous
channel for add-up panels. 4H
standard crown frames include
shaped crowns for upmounting
shelves or overhead storage
cabinets, canopy lighting at any
point. Compact crown frames
feature a slim profile crown with
downmounting capability only.
Crown is bored to accept stackable
add-up panels at 3 increments.
Service Wall frames include two
levelling feet with 2 travel, 12
from each side edge.
Acoustical inserts fit between studs
in Service Wall frame to increase
control of sound transmission.
Inserts are bagged in heights
corresponding to wall frame. Specify
four inserts for 48W frame, five for
60W frame, and six for 72W
frame. Service Walls with acoustical
inserts have been tested to STC 33.
Inserts do not affect the NRC rating
of the wall which is .40.
Specify crown covers, raceway
covers, structural base covers, and
wall covers for each face of Service
Wall frame, and specify power
components separately.
46