Price List July 2012 - Knoll

AutoStrada Ported Panel Components
port, vertical duplex and panel jumpers
AutoStrada
description type pattern no. list price
Adjacent Panel Jumper, 10w Adjacent Panel Jumper 110 10w RR3TVJ110 $239.
Adjacent Panel Jumper 82 10w RR3TVJ82 206.
Adjacent Panel Jumper 96 10w RR3TVJ96 223.
Adjacent Panel Jumper, 8w Adjacent Panel Jumper 110 8w RR3EVJ110 210.
Adjacent Panel Jumper 82 8w RR3EVJ82 183.
Adjacent Panel Jumper 96 8w RR3EVJ96 199.
Internal Panel Jumper Internal Panel Jumper 10 w RR3TVJ 153.
Internal Panel Jumper 8 w RR3EVJ 142.
Order Code
Specification Information
Application Note
Example: RR3VPBK
RR3 Reff
VP Vertical port
BK Bracket kit
For data and communications
specify product listed on page 0.
30 same panel jumper only used if
there is a harness in base of 30
panel . Length of panel jumper
required driven by intended
location of port.
50 will support port location in
extreme top corner of 49h
64 will support port location in
extreme top corner of 64h
78 will support port location in
extreme top corner of 79h
36+ same panel jumper only used
if there is a harness in the base of
36,42 or 48 panels. Length of
panel jumper required driven by
intended location of port.
62 will support port location in
extreme top corner of 49h
76 will support port location in
extreme top corner of 64h
90 will support port location in
extreme top corner of 79h
If harness is in base of 24 panel
you can not jump vertically, must
remove harness.
A harness for Reff 30 wide panel
with raceway on one side will only
accept one same panel jumper. A
duplex will not fit with the same
panel jumper installed in the
harness.
Internal panel jumper to be used
within a panel, between two ports
approximate span 48. Both duplex
units must be the same circuit for
this application.
Adjacent Panel Jumpers:
82 is max for 49 high panel
96 is max if panel is 64 high
110 is max if panel is 79 high
All covers plates and snap in
modules are black.
138