Price List July 2012 - Knoll

Extended end counters
AutoStrada
description
Extended end counter, postformed plastic
with hinged power access
nominal
depth w l h pattern no. L M V1 V2 V3
36 48 36 1 1 /4 XTTP4836D (L) ( )( ) $990. n/a n/a n/a n/a
36 60 36 1 1 /4 XTTP6036D (L) ( )( ) 1,125. n/a n/a n/a n/a
36 72 36 1 1 /4 XTTP7236D (L) ( )( ) 1,223. n/a n/a n/a n/a
* Note
Extended end counter, postformed plastic
with grommet
36 48 36 1 1 /4 XTTP4836E (L) ( ) 691. n/a n/a n/a n/a
36 60 36 1 1 /4 XTTP6036E (L) ( ) 826. n/a n/a n/a n/a
36 72 36 1 1 /4 XTTP7236E (L) ( ) 924. n/a n/a n/a n/a
* Note
Crinion Open Table
Order Code
Example: XTTP6036DL 118 AA
XT Crinion Open Table
T Worksurface
P Postformed plastic
60 Width
36 Length
D End counter,center
hinged power access
L Finish Type
118 Surface finish
AA Access door finish
Specifications
End counters are 1 1 /4 thick with
square edge or tapered edge option
tapering to 1 /2 thick front edge. End
counters are tapered front and side
edges only.
1. Specify finish group:
L - Laminate
M- Laminate/veneer edge
1 - Veneer group 1
2 - Veneer group 2
3 - Veneer group 3
2. Specify worksurface finish.
3. Specify hinged access cover
finish.
Hinged access covers are available
in AA anodized aluminum and all
standard paint finishes except 613
Silver.
259
Application Notes
End counters mount at the ends of
dual tables with two end counter
cantilever brackets. Specify dual
end legs for end counters instead of
standard dual end legs (tables with
end counters must be specified from
components, not assemblies).
Specify 48 W for dual 24 tables,
60 W for dual 30 tables and 72 W
for dual 36 tables.
End counters may not be used with
end panel kits.
Each extended end counter requires
base assembly 12 longer than
worksurfaces on each side.
* Note - End counters for
postformed plastic are not available
in these finishes:
121 Micro grey
129 Micro sand
122 Brushed sand
123 Brushed grey