Price List July 2012 - Knoll

Spine ends and connectors
Spine end connectors for linkable screens and Morrison panels
AutoStrada
description application h w d pattern no. list
Spine end connector 39h spine 39 5 1
/2 AX1SEC3939 ( )( )( )( ) $243.
48h spine 48 5 1
/2 AX1SEC4848 ( )( )( )( ) 255.
64h spine 64 5 1
/2 AX1SEC6464 ( )( )( )( ) 305.
Spine end connector to top of compact 1h crown 39h spine 40 5 1
/2 AX1SEC4039 L ( )( ) 243.
48h spine 49 5 1
/2 AX1SEC4948 L ( )( ) 255.
64h spine 65 5 1
/2 AX1SEC6564 L ( )( ) 305.
Spine and linkable screens
Spine end connector to top of Currents 4h crown 39h spine 43 5 1
/2 AX1SEC4339 C ( )( ) 243.
48h spine 52 5 1
/2 AX1SEC5248 C ( )( ) 255.
64h spine 68 5 1
/2 AX1SEC6864 C ( )( ) 305.
Inside base trim cover
for Currents raceway
4 5 AX1SECBT ( ) 48.
Order Code
Specification Information
Application Notes
Example: AX1 SEC 3939 L 613
613 812
AX1 Spine connector
SEC Type
39 Connector height
39 Spine height
L Crown type
613 Crown end cap finish
613 Vertical cover finish
812 Top cap finish
For spine end connectors specify:
1.Crown type
C=Currents standard 4h
L=low profile flat 1
H=high profile flat 1 1 /4
F=compact crown 1
2.Crown end cap finish
Standard, low and high profile flat
and compact crown end caps are
available in all standard paint
finishes and 813 Trim Grey.
Compact crown end caps are also
available in 812 Easy Grey.
3.Vertical cover finish:
All standard paint finishes
4.Top cap for vertical cover:
812=Easy Grey
813=Trim Grey
And all standard paint finishes
Spine end connectors on this page
align with spine base covers 13 /16
above the floor.
Spine end connectors are complete
vertical cover and top trim for the
end of an AutoStrada or Currents
spine. Side edges of end connectors
accept end starters for linkable
screens and other systems panels of
the same height or lower.
Spine end connectors include
painted aluminum cover with
beveled top cap and the specified
flat, compact, or standard crown end
cap.
Spine end connectors to top of
compact crown are a visual
alternative that replaces the crown
end cap with a taller aluminum end
cover and flat top cap.
Spine end connectors to top of
Currents crown are recommended
when attaching any end started
panel that is between the nominal
height of the spine and the actual
height with crown, such as 42h
panel to 39h spine with 4h crown.
Spine end connectors to top of
Currents crown enclose the end of
spine and standard crown and
include flat top cap and inside top
trim cover.
Inside base trim for Currents
raceway is recommended to finish
inside of any spine end connector
when combined with standard
Currents recessed base raceway
covers. Base trim is not required
with AutoStrada spine base covers.
61