Price List July 2012 - Knoll

Panel hung worksurface support
AutoStrada
description d pattern no. P1 P2 P3
Cantilever bracket, panel hung 18 ASBC18 (L/R) ( ) $95. $100. $104.
24 ASBC24 (L/R) ( ) 104. 112. 117.
18 for 20 and 24 deep tops
24 for 30 and 36 deep tops
specify paint finish
Side hung support bracket, pair RBCCP ( ) 40. 42. 43.
specify paint finish
Support Components
top to top brackets (pair)
for use when top to top condition is without tapered
edges
6 x1 RBF 5.
Top to top bracket
for use with tapered edge worksurface conditions
(’tapered to tapered’ or ’tapered to straight’)
4 x7 AT2TB (pair) 101.
Order Code
Specification Information
Application Notes
Example: RBC18L111
R from Reff
B Bracket
C Cantilever
18 18 deep
L Left hand
111 Finish, Jet black
To order please specify pattern
number including:
1. Left or right hand where
applicable
2. Paint finish where applicable
Specify painted finish from paint
options listed on page 7.
Flat edge to flat edge:
RBF top to top brackets are for end
to end worksurface connection, no
tapered edges.
A cantilever bracket should be used
to join two adjacent straight
worksurfaces along with pair of RBF
top to top brackets. RBF brackets
install between screw ports on
cantilever bracket to underside of
worksurface.
Tapered edges:
AT2TB top to top brackets are for
connection of worksurfaces at right
angle, with one or both edges
tapered.
A cantilever bracket should be used
to join two worksurfaces along with
pair of AT2TB top to top brackets.
Install one AT2TB bracket behind
cantilever and one in front of
cantilever.
Midspan suport required every 48
for all worksurfaces.
Side hung support brackets provide
primary connection of a worksurface
to a panel, not recommended for
midspan support.
239