Price List July 2012 - Knoll

Worksurface support
Straight legs, wide legs and L-legs
AutoStrada
description type height pattern number list
Straight leg (pair) Fixed height 27 AB1AS27 ( ) $363.
28 3 /8 AB1AS28 ( ) 383.
30 1 /8 AB1AS30 ( ) 393.
Straight leg with casters (pair) Fixed height 27 AB1ASC27 ( ) 363.
28 3 /8 AB1ASC28 ( ) 383.
30 1 /8 AB1ASC30 ( ) 393.
Wide leg Fixed height 27 AB1AW27 ( ) 336.
28 3 /8 AB1AW28 ( ) 356.
L-legs (pair) Fixed height 26 1 /2 APTLL26( ) 643.
27 APTLL27( ) 661.
28 3 /8 APTLL28( ) 672.
Order Code
Example: AB1AS28 AA
AB1A AutoStrada leg
S Straight
28 Height
AA Finish
Specification Information
AutoStrada straight legs, wide legs
and L-legs are available in anodized
aluminum or painted finish option
listed on page 7 excluding silver.
To order specify pattern number
including height
1. Specify finish
240
Application Notes
A pair of straight legs or a pair of
L-legs or one wide leg can support
one end of a worksurface when the
other end is spine-supported,
panel-supported or joined to a
perpendicular worksurface with
AT2TB brackets. If distance
between support spans over 48,
additional support is required.
Two pairs of straight legs or L-legs
may also be specified to create a
freestanding table in combination
with an AutoStrada worksurface not
to exceed 72 x36 with a
corresponding worksurface stiffener.
AutoStrada straight legs are
available in three heights with or
without casters:
27 from floor to underside of
worksurface ( 28 3 /8 desk height )
28 3 /8 from floor to underside of
worksurface (29 3 /4 desk height )
30 1 /8 from floor to underside of
worksurface (31 1 /2 desk height )
AutoStrada wide legs are only
available on glides, 27 or 28 3 /8 to
underside of worksurface.
AutoStrada L-legs are available in
three heights, glide only (no caster
option) 26 1 /2h, 27h and 28 3 /8h.