Price List July 2012 - Knoll

Flush, user edge tapered
Wedge
AutoStrada
description d, left w d, right pattern no. L M V1 V2 V3
Wedge, (full depth) front edge tapered 24 48 30 AW1T1WF4823 ( )( )( )( )( ) $571. $678. $712. $821. $1,069.
24 60 30 AW1T1WF6023 ( )( )( )( )( ) 606. 761. 799. 917. 1,192.
24 72 36 AW1T1WF7226 ( )( )( )( )( ) 749. 855. 898. 1,028. 1,335.
30 48 24 AW1T1WF4832 ( )( )( )( )( ) 571. 678. 712. 821. 1,069.
30 60 24 AW1T1WF6032 ( )( )( )( )( ) 606. 761. 799. 917. 1,192.
36 72 24 AW1T1WF7262 ( )( )( )( )( ) 749. 855. 898. 1,028. 1,335.
Presentation wood sample
(with tapered edge detail)
16 16 16 ASAMP1616 ( ) 113. 165. 173. 230. 272.
Order Code
Specification Information
Application Notes
Example: AW1T1WF4823MG118
V316613
A AutoStrada
W Worksurface
1 Generation 1
T1 Tapered 1 side, user
W Wedge
F Full depth, flush
48 48 wide
2 24 deep, left
3 30 deep, right
M Surface type, Mixed
G Grommet
118 Finish surface, Bright
white
V316 Finish edge, Maple
613 Finish, grommet
To order please specify pattern
number including:
1. Width
2. Depth
23=24 deep left, 30 deep right
32=30 deep left, 24 deep right
26=24 deep left, 36 deep right
62=36 deep left, 24 deep right
3. Surface type
L = Laminate
M = Mixed, Laminate surface/V1,
V2 or V3 edge
V = V1, V2 or V3
4. Grommet option
N = No grommets
G = Grommet(s), flush
R = Grommet(s), recessed
5. Finish, Surface
Laminate, V1, V2 or V3 finish
6. Finish, Edge
Must be same as surface finish
unless M surface type specified,
then must be V1, V2 or V3 finish
7. Finish, Grommet(s)
specify painted or plated finish
See page 7 for finish options
applicable.
Product on this page will accept
wood grain laminate where laminate
is currently an option.
Hardware to attach to vertical
support to be specified separately.
1 1 /4 tops require additional support
when distance spans over 48.
Actual widths are 1 /16 less than
nominal dimension noted and
depths are 1 /8 less than nominal
dimension noted.
When grommets specified up to
48w tops have one grommet, over
48w have two grommets.
222