Price List July 2012 - Knoll

Spine ends and connectors
Spine end connectors for AutoStrada and Reff panels and Gallery
screens
AutoStrada
description application h w d pattern no. list
Spine end connector 34 panel or 39 screen/39h spine 39 5 1
/2 AX1SEA3939 ( )( )( )( ) $243.
34-42 panel or 39-49 screen/48h spine 48 5 1
/2 AX1SEA4848 ( )( )( )( ) 255.
34-49 panel or screen/64h spine 64 5 1
/2 AX1SEA4964 ( )( )( )( ) 305.
42 panel/39h spine + 1 1 /4 crown 42 5 1
/2 AX1SEA4239 ( )( ) 243.
42 panel/39h spine + 4 crown 43 5 1
/2 AX1SEA4339 C ( )( ) 243.
49 panel /39h spine 49 5 1
/2 AX1SEA4939 ( )( ) 255.
49 panel or screen/48h spine + 1 1 /4 crown 49 5 1
/2 AX1SEA4948 ( )( ) 268.
49 panel or screen/48h spine + 4 crown 52 5 1
/2 AX1SEA5248 C ( )( ) 255.
64 panel/39h spine 64 5 1
/2 AX1SEA6439 ( )( ) 305.
64 panel/48h spine 64 5 1
/2 AX1SEA6448 ( )( ) 305.
64 panel/64h spine + 1 1 /4 crown 65 5 1
/2 AX1SEA6464 ( )( ) 305.
64 panel/64h spine + 4 crown 68 5 1
/2 AX1SEA6864 C ( )( ) 305.
79 panel/48h spine 79 5 1
/2 AX1SEA7948 ( )( ) 463.
79 panel/64h spine 79 5 1
/2 AX1SEA7964 ( )( ) 443.
Spine and linkable screens
Inside base trim cover
for Currents raceway
4 5 AX1SECBT ( ) 48.
Order Code
Specification Information
Application Notes
Example: AX1 SEA 4239 613 613
812
AX1 Spine connector
SEA Type
42 Panel height
39 Spine height
613 Painted finish
613 Trim finish
812 Top trim finish
For spine end connectors when
panels are lower than spine specify
crown type and finish for crown end
cap.
1. Crown type:
C=Currents standard 4h
L=low profile flat 1h
H=high profile flat 1 1 /4h
F=compact 1h
2. All crown end caps are available
in all painted finishes.
For all spine end connectors
specify vertical cover and top
trim finish.
3. Vertical cover finish:
All standard paint finishes
Spine end connectors are complete
end cover and trim for an
AutoStrada or Currents spine. Side
edges of spine end connectors
accept end starters for AutoStrada
or Reff panels or Gallery screens.
In most cases spine end connectors
match the height of the attached
panel. When attached panel is lower
than the spine, the spine end
connector is as high as the nominal
height of the spine and the crown
requires an end cap.
When attached panel is between the
nominal height of the spine and the
top of the Currents 4h crown, spine
end connector must cover the entire
height of the spine with crown.
Spine end connectors include
painted outside cover with flat top
cap and inside cover (where
applicable) over the end of the
spine.
Inside base trim for Currents
raceway is recommended to finish
inside when combined with
standard Currents recessed base
raceway covers. Base trim is not
required with AutoStrada spine base
covers.
4. Top trim for vertical cover:
812=Easy Grey
813=Trim Grey
And all standard paint finishes
End connectors on this page
begin 1 /2 above floor.
63