Price List July 2012 - Knoll

AutoStrada Ported Panel Components
port, vertical duplex and panel jumpers
AutoStrada
description type pattern no. list price
Port Floating data port RR3FDP $57.
Vertical Power Port Bracket Kit (includes
bracket, cover plate & installation instructions)
RR3VPBK 89.
Vertical Duplex Vertical Duplex A (8/10 wire applications) RR3VDA 30.
Vertical Duplex B (8/10 wire applications) RR3VDB 30.
Vertical Duplex C (10 wire applications) RR3VDC 30.
Vertical Duplex X (8/10 wire applications) RR3VDX 30.
Vertical Duplex X Iso (8/10 wire applications) RR3VDXO 30.
Vertical Duplex Y (8/10 wire applications) RR3VDY 30.
Vertical Duplex Y Iso (8/10 wire applications) RR3VDYO 30.
Vertical Duplex Z (10 wire applications) RR3VDZ 30.
Vertical Duplex Z Iso (10 wire applications) RR3VDZO 30.
Same Panel Jumper, 8w 30 same Panel Jumper 50 8w RR3EBVC50 152.
30 same Panel Jumper 64 8w RR3EBVC64 165.
30 same Panel Jumper 78 8w RR3EBVC78 180.
36 + same Panel Jumper 62 8w RR3EBVC62 164.
36 + same Panel Jumper 76 8w RR3EBVC76 179.
36 + same Panel Jumper 90 8w RR3EBVC90 195.
Panels
Same Panel Jumper, 10w 30 same Panel Jumper 50 10w RR3TBVC50 174.
30 same Panel Jumper 64 10w RR3TBVC64 191.
30 same Panel Jumper 78 10w RR3TBVC78 209.
36 + same Panel Jumper 62 10w RR3TBVC62 187.
36 + same Panel Jumper 76 10w RR3TBVC76 205.
36 + same Panel Jumper 90 10w RR3TBVC90 220.
Order Code
Specification Information
Application Note
Example: RR3VPBK
RR3 Reff
VP Vertical port
BK Bracket kit
For data and communications
specify product listed on page 0.
30 same panel jumper only used if
there is a harness in base of 30
panel . Length of panel jumper
required driven by intended
location of port.
50 will support port location in
extreme top corner of 49h
64 will support port location in
extreme top corner of 64h
78 will support port location in
extreme top corner of 79h
36+ same panel jumper only used
if there is a harness in the base of
36,42 or 48 panels. Length of
panel jumper required driven by
intended location of port.
62 will support port location in
extreme top corner of 49h
76 will support port location in
extreme top corner of 64h
90 will support port location in
extreme top corner of 79h
If harness is in base of 24 panel
you can not jump vertically, must
remove harness.
A harness for Reff 30 wide panel
with raceway on one side will only
accept one same panel jumper. A
duplex will not fit with the same
panel jumper installed in the
harness.
Internal panel jumper to be used
within a panel, between two ports
approximate span 48. Both duplex
units must be the same circuit for
this application.
Adjacent Panel Jumpers:
82 is max for 49 high panel
96 is max if panel is 64 high
110 is max if panel is 79 high
All covers plates and snap in
modules are black.
137