Price List July 2012 - Knoll

Table desks
with L-legs
AutoStrada
description h w d
Rectangular table desk with L-legs
and partial front and side modesties
leg
height pattern no. L M V1 V2 V3
28 3 /8 48 30 27 ATDT1LPS483027(L/M/V)( )( )( )( )( ) $3,009. $3,343. $3,510. $3,581. $4,117.
28 3 /8 60 30 27 ATDT1LPS603027(L/M/V)( )( )( )( )( ) 3,050. 3,390. 3,560. 3,632. 4,177.
28 3 /8 72 30 27 ATDT1LPS723027(L/M/V)( )( )( )( )( ) 3,089. 3,431. 3,603. 3,677. 4,227.
28 3 /8 72 36 27 ATDT1LPS723627(L/M/V)( )( )( )( )( ) 3,116. 3,462. 3,635. 3,710. 4,266.
29 3 /4 48 30 28 3 /8 ATDT1LPS483028(L/M/V)( )( )( )( )( ) 3,102. 3,446. 3,618. 3,693. 4,246.
29 3 /4 60 30 28 3 /8 ATDT1LPS603028(L/M/V)( )( )( )( )( ) 3,145. 3,493. 3,668. 3,743. 4,304.
29 3 /4 72 30 28 3 /8 ATDT1LPS723028(L/M/V)( )( )( )( )( ) 3,182. 3,535. 3,712. 3,787. 4,356.
29 3 /4 72 36 28 3 /8 ATDT1LPS723628(L/M/V)( )( )( )( )( ) 3,209. 3,566. 3,744. 3,821. 4,395.
Order Code
Example: ATDT1LPS483027VG
V316AA111
A AutoStrada
TD Table desk
T1 Top tapered 1 side
(user only)
L L-Leg
FM Full front modesty
48 48 wide
30 30 deep
27 Leg height
V Surface type, veneer
G Grommet
V316 Finish top, Maple
AA Finish, leg
111 Grommet finish
Specification Information
To order please specify pattern
number including:
1. Full or partial modesty (and end
panels when applicable)
2. Width
3. Depth
4. Leg height (to underside of
surface)
27=27h
28=28 3 /8h
5. Surface type
L = Laminate
M = Mixed, Laminate surface/V1,
V2 or V3 edge
V = V1, V2 or V3
6. Grommet
G=Grommet
N=No Grommet
7. Finish, Surface
Laminate, Mixed, V1, V2 or V3
finish
234
8. Finish, Edge
Must be same as surface finish
unless M surface type specified,
then must be V1, V2 or V3 finish
9. Finish, Leg
Anodized aluminum finish or
painted finish option excluding
silver.
10. Finish, Grommet
See page 7 for finish options
applicable.
Laminate finish options for modesty
panels on this page are as follows:
114 = Folkstone grey
117 = Soft grey
118 = Bright white
119 = Pumice
Product on this page will accept
wood grain laminate where laminate
is currently an option.
Worksurface stiffener included with
rectangular tables 60w and over.
Application Notes
AutoStrada tables include four
L-legs with glides and full or partial
height modesty (and optional end
panels).
Tables can be specified to overall
surface height of:
28 3 /8 : specify 27 leg.
29 5 /8 : specify 28 leg.
Partial height option for 27 leg is
nominally 13 and 14h nominally
with 28 3 /8h legs; and may be
mounted flush to underside of
worksurface or with 1 gap below
worksurface.