Price List July 2012 - Knoll

Worksurface stand-offs and cabinet feet
AutoStrada
description height dia. pattern no. list
Worksurface stand-off (pair) 1 1 3 /4 AWSO ( ) $32.
Cabinet feet (pair) 1 7 /8 1 3 /4 ACF ( ) 162.
Worksurface stand-off (pair), for ‘‘ganging’’ 1 1 3 /4 AWSOG ( ) 32.
Cabinet feet (pair) for ‘‘ganging’’ 1 7 /8 1 3 /4 ACFG ( ) 162.
Cabinet metal cap leveler
(12/pk)
ACMCL 18.
Order Code
Specification Information
Application Notes
Example:
A
WSO
AA
AWSOAA
AutoStrada
Work surface stand-off
Finish, anodized
aluminum
To order please specify pattern
number including:
1. Finish
AA - anodized aluminum or
painted finish option from page
7 excluding silver
Worksurface stand-offs are for use
primarily in the private office
between work surfaces and wood
case pedestals or lower storage.
Worksurface stand-offs may also be
installed in place of anti-tip wood
spacer between worksurfaces and
wood case pedestals or lower storage
in storage anchored planning.
Anti-tip wood spacer and stand-offs
are both 1h.
Cabinet feet are for use with lower
storage units in private office
planning to achieve overall
worksurface height of 29 5 /8.
Note: Free-standing cabinets on
page 177 include cabinet feet.
If you are planning to create an open
knee space credenza with one
storage unit on either end of the
credenza, you would require 2 pairs
of work surface stand-offs and 2
pairs of cabinet feet for each lower
storage unit.
When ‘‘ganging’’ units together to
create ‘‘build-to-spec’’ credenzas,
one pair of worksurface stand-offs
and one pair of cabinet feet are
required to span side-by-side units.
For instance, if creating a credenza
with 3 lower storage units, specify 4
pairs of stand-offs and 4 pairs of
cabinet feet.
Cabinet feet should not be used in
spine-based or storage anchored
planning models. Use only with
wood case pedestals and laterals to
achieve overall worksurface height
of 29 5 /8 (or 28 3 /8 to underside of
worksurface). Spine based and
Storage Anchored planning model
components are engineered at 27
from floor to underside of
worksurface.
To install cabinet feet, first remove
leveller from pedestal or lower
storage, then reinstall with feet.
250