Price List July 2012 - Knoll

AutoStrada Ported Panel Components
application notes
AutoStrada
Ported Panel Components
Reff ported panel components offer a
cost effective alternative to using
beltway panels which will provide
users convenient access to data or
power outlets at any user defined
height on a Reff panel. Ports are one
sided and may be installed below a
worksurface, at desk height or even
within a panel hung overhead storage
unit.
Select option Milled for ported
components when specifying panels.
Ports may be added as technology
needs change. Ports are field
installed on the left or right hand
side of a panel’s vertical frame in
fabric inserts only. Installation
instructions will be shipped with
each kit, including a template for
port placement along the vertical
frame.
Panel jumpers are used to connect
standard base electrical to the ported
panel kit. Jumpers can be specified
to connect a port within the same
panel or to adjacent panels. Panel
jumpers always pass through base
raceway. If one port is installed, an
additional port may be added within
the same panel with an internal
power jumper between the two ports.
Ports can also be daisy-chained
together in adjacent panels. Ported
panel components are not available
for stackable modules.
The kit includes a bracket set and
cover plate and is ordered separately
from the modular power components.
Specify electrical components as you
would for base raceway power then
add the ported panel bracket kit,
applicable duplexes and power
jumpers.
Vertical power port bracket kit and
duplex.
136