Price List July 2012 - Knoll

End legs, intermediate leg sets for dual tables
AutoStrada
description application w d h pattern number P1/P2 P3
End leg for end counters one end only
(pair of legs for 36D worksurface)
48 W end counter 4 44 24 XTB1YDD24 ( ) $4,693. $4,918.
60 W end counter 4 54 24 XTB1YDD30 ( ) 4,693. 4,918.
72 W end counter 4 54 24 XTB1YDD36 ( ) 4,693. 4,918.
Order Code
Specifications
Application Notes
Example: XTB1EDD30 118
XT Crinion Open Table
B1 Base components
E End leg
D Dual
D Desk height
30 Depth of tops
118 Finish
Specify paint finish code after
pattern number.
Crinion Open Table bases are
assembled from main beams, end
legs or end panels, intermediate
legs and trusses. After selecting
starter or segmented beam sets,
specify legs to support each end of
beams. End legs support main
beams at each end of a table.
Dual end legs for end counters have
threaded metal inserts on the
outside of the leg to accept two fixed
height or adjustable cantilevers for
end counters.
Intermediate legs must be specified
to provide support under beam sets
spanning longer than 16’.
Intermediate legs may be positioned
under beams at any beam truss
location. End legs include beam end
plates and hardware.
Shroud for intermediate leg kit
encloses the space between legs to
protect power, data and
communication cables between floor
and table base. Side covers may be
removed for access.
Shroud for 24d intermediate leg is
U-shaped cover that attaches to side
of intermediate leg for 24dorany
single sided intermediate leg.
End legs for 24D worksurfaces and
end legs for 48W end counters
have only one end plate for
attaching a single centered beam for
24D tables.
End legs for 30D and 36D
worksurfaces and end legs for 60W
and 72W end counters have two
end plates for attaching two beams
for 30D and 36D tables.
276