Price List July 2012 - Knoll

Worksurface support
cantilever and mid span support
AutoStrada
description w d h pattern number P1/P2 P3
Cantilever, fixed height 30 or 36 D 3 24 9 XTB1FC ( ) $227. $237.
Cantilever, fixed height 24 D 3 19 9 XTB1FC24 ( ) 227. 237.
Cantilever, adjustable height 30 or 36 D 3 24 9 -12 XTB1AC ( ) 250. 264.
Cantilever, adjustable height 24 D 3 24 9 -12 XTB1AC24 ( ) 250. 264.
Mid span support 2 2 8 XTB1MB ( ) 107. 113.
Crinion Open Table
Order Code
Specifications
Application Notes
Example: XTB1FC 118
XT Crinion Open Table
B1 Base components
FC Fixed height cantilever
118 Finish
Specify paint finish code after
pattern number.
48worksurfaces: shared
cantilevers each end or two
adjustable per worksurface.
60 and 72 worksurfaces: shared
cantilevers each end plus mid span
support or two adjustable
cantilevers inset 8.
96worksurfaces: shared
cantilevers at ends plus one in
center or three adjustable
cantilevers.
96x24 with hinged door: shared
cantilever each end plus two mid
span supports.
96x30 with hinged door: shared
cantilever each end plus 24d
cantilever as center support.
96x36 with hinged door: shared
cantilever each end plus 24,30
or 36d cantilever as center support.
Cantilever brackets are required to
support each end of worksurfaces.
Brackets can be positioned at ends
of worksurface, or inset at legs or
floorstanding pedestal locations.
Fixed height cantilevers can be
shared between adjacent
worksurfaces. Mid span support
bracket must be specified for
worksurface spans exceeding 4’.
Fixed height cantilever supports
worksurface at 28 1 /2 H.
Adjustable cantilevers enable
worksurfaces to be set at 27,27 3 /4,
28 1 /2,29 1 /4 or 30 H.
281