Price List July 2012 - Knoll

Panel system starters and T-ends
AutoStrada and Reff panel starters and T-ends
AutoStrada
description type pattern number list extension, 0 or 1 1/8 extension, 3 1/2
AutoStrada or Reff panel starter 34H (includes AA1RTC bracket) AA1RPS34( )( )( )( ) $130.
42H (includes AA1RTC bracket) AA1RPS42( )( )( )( ) 226.
49H (includes AA1RTC bracket) AA1RPS49( )( )( )( ) 232.
64H (includes AA1RTC bracket) AA1RPS64( )( )( )( ) 247.
79H (includes AA1RTC bracket) AA1RPS79( )( )( )( ) 257.
T-end frame for AutoStrada
or Reff panels
42 panel to 39 spine frame AX1 R34239( )( ) 926. 1,021.
49 panel to 39 spine frame AX1 R34939( )( ) 937. 1,032.
49 panel to 48 spine frame AX1 R34948( )( ) 878. 969.
64 panel to 39 spine frame AX1 R36439( )( ) 1,036. 1,128.
64 panel to 48 spine frame AX1 R36448( )( ) 975. 1,069.
64 panel to 64 spine frame AX1 R36464( )( ) 975. 1,069.
79 panel to 39 spine frame AX1 R37939( )( ) 1,044. 1,138.
79 panel to 48 spine frame AX1 R37948( )( ) 982. 1,075.
79 panel to 64 spine frame AX1 R37964( )( ) 951. 1,044.
T-end frame for AutoStrada panel
without base raceway
42 panel to 39 spine frame AX1 A34239( )( ) 926. 1,021.
49 panel to 39 spine frame AX1 A34939( )( ) 937. 1,032.
49 panel to 48 spine frame AX1 A34948( )( ) 878. 969.
64 panel to 39 spine frame AX1 A36439( )( ) 1,036. 1,128.
Order Code
Example: AA1-RPS6448E613AA
AA1 Accessory
R Reff/AutoStrada
PS Panel starter
64 Panel height
48 Adjoining panel width
E Panel top trim profile
613 Finish, panel starter
AA Panel top trim finish
Specification Information
For T-end specify extension at end
of spine, then paint finish.
Extension at end of spine:
0 0 extension
1 1 1 /8 extension
3 3 1 /2 extensions
Specify following for panel starter:
1. Adjoining panel width (panel
starter includes extended panel
top trim for panel attached to
starter)
2. Top trim profile of adjoining
panel
E = Extruded aluminum top trim
3. Painted finish for panel starter
4. Top trim finish
Anodized aluminum or painted
finish
Please specify painted finish for
panel starters and inside covers of T
-end from paint finish options listed
on page 7.
72
Application Notes
Panel starters attach perpendicular
AutoStrada panels to Service Wall.
Panel starter includes clamp
bracket to structural base cover, top
clip, and vertical extrusion
corresponding to AutoStrada panel
height.
T-end encloses the end of a Service
Wall and connects to perpendicular
AutoStrada panels on one or both
sides.
Specify AutoStrada end connector to
finish side edge without a connected
wall.
Specify T-end with 0,1 1 /8,or3 1 /2
of extension to accommodate the
‘‘creep’’ of panels between
workstations on each side of Service
Wall.
Specify two 0 T-ends for a single
workstation on each side (no
intermediate panels).
Specify two 1 1 /8 T-ends for one
intermediate panel, one 1 1 /8 and
one 3 1 /2 for two panels, and two
3 1 /2 for three intermediate panels.
T-ends with 3 1 /2 extension have
removable inside covers and accept
ceiling infeed panel.
Finish options for AA1RTC( ) top
clip:
118 White
111 Black
613 Silver
To complete T - end solution, must
specify frame, crown end cap,
raceway extender and cover set.