Price List July 2012 - Knoll

Spine ends and connectors
Spine end connectors for Dividends Horizon panels and screens
AutoStrada
description application h w d pattern no. list
Spine end connector 36h panel/39h spine 39 5 1
/2 AX1SED3939 ( )( )( )( ) $243.
36h-42h panel/ 48h spine 48 5 1
/2 AX1SED4848 ( )( )( )( ) 255.
36h-64h panel/ 64h spine 64 5 1
/2 AX1SED6464 ( )( )( )( ) 305.
42h panel/ 39h spine + 1 crown 42 5 1
/2 AX1SED4239 ( )( ) 243.
42h panel/ 39h spine + 4 crown 43 5 1
/2 AX1SED4339C ( )( ) 243.
50h panel/ 39h spine 50 5 1
/2 AX1SED5039 ( )( ) 255.
50h panel/ 48h spine + 1 crown 50 5 1
/2 AX1SED5048 ( )( ) 268.
50h panel/ 48h spine + 4 crown 52 5 1
/2 AX1SED5248C ( )( ) 255.
57h panel/ 39h spine 57 5 1
/2 AX1SED5739 ( )( ) 293.
57h panel/ 48h spine 57 5 1
/2 AX1SED5748 ( )( ) 293.
64h panel/ 39h spine 64 5 1
/2 AX1SED6439 ( )( ) 305.
64h panel/ 48h spine 64 5 1
/2 AX1SED6448 ( )( ) 305.
78h panel/ 48h spine 78 5 1
/2 AX1SED7848 ( )( ) 463.
78h panel/ 64h spine 78 5 1
/2 AX1SED7864 ( )( ) 443.
Inside base trim cover
for Currents raceway
4 5 AX1SECBT ( ) 48.
Order Code
Specification Information
Application Notes
Example: AX1 SED 6448 613 812
AX1 Spine connector
SED Type
64 Panel height
48 Spine height
613 Vertical cover finish
812 Top cap finish
For spine end connectors with panel
lower than spine specify crown type
and finish for crown end cap.
1. Crown type:
C=Currents standard 4h
L=low profile flat 1h
H=high profile flat 1 1 /4h
F=compact 1h
2. All crown end caps are available
in all painted finishes.
For all spine end connectors
specify vertical cover and top
trim finish:
3. Vertical cover finish:
All standard paint finishes
4. Top cap for vertical cover:
812=Easy Grey
813=Trim Grey
And all standard painted finishes
Spine end connectors are complete
end cover and trim for an
AutoStrada or Currents spine. Side
edges of spine end connectors
accept end starters for Dividends
Horizon panels and screens.
In most cases spine end connectors
match the height of the attached
Dividends Horizon panel/screen.
When attached panel/screen is
lower than the spine, the spine end
connector is as high as the nominal
height of the spine and the crown
requires an end cap.
Specify low profile flat metal crown
covers to align with a 50h
Dividends Horizon panel/screen.
When attached panel/screen is
between the nominal height of the
spine and the top of the Currents
4h crown, spine end connector
must cover the entire height of the
spine with crown.
Spine end connectors include
painted aluminum outside cover
with flat top cap and inside cover
(where applicable) over the end of
the spine.
Inside base trim for Currents
raceway is recommended to finish
inside when combined with
standard Currents recessed base
raceway covers. Base trim is not
required with AutoStrada spine base
covers.
End connectors on this page
begin 1 /2 above floor.
64