Price List July 2012 - Knoll

Complete base assemblies
fixed height 24 D single sided
AutoStrada
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ single sided 120 24 28 1 /2 XTB1 BAS 24S10CF ( )( ) $8,346. $8,584.
12’ single sided 144 24 28 1 /2 XTB1 BAS 24S12CF ( )( ) 8,736. 8,971.
15’ single sided 180 24 28 1 /2 XTB1 BAS 24S15CF ( )( ) 9,909. 10,149.
Base assembly, segmented 10’+5 single sided 180 24 28 1 /2 XTB1 BAS 24S15SF ( )( ) 10,723. 10,963.
Base assembly, with intermediate leg 12’+6 single sided 216 24 28 1 /2 XTB1 BAS 24S18SF ( )( ) 11,962. 12,204.
10’ + 10’ single sided 240 24 28 1 /2 XTB1 BAS 24S20SF ( )( ) 12,847. 13,093.
12’ + 12’ single sided 288 24 28 1 /2 XTB1 BAS 24S24SF ( )( ) 13,624. 13,869.
15’ + 10’ single sided 300 24 28 1 /2 XTB1 BAS 24S25SF ( )( ) 14,408. 14,660.
Order Code
Specifications
Application Notes
Example: XTB1BAS24S10CF 613
118
XT Crinion Open Table
B1 Base components
BAS Assembly
24 Depth
S Single
10 Width
C Continuous
F Fixed height
613 Base finish
118 Top channel finish
Base assemblies include end legs,
beams, trusses, cantilever brackets,
channels and end caps.
Fixed height base assemblies have
shared cantilever brackets for
adjacent worksurfaces and midspan
support brackets for every
worksurface.
1. Specify base finish for base
assembly.
For legs and cantilever brackets
specify one paint finish for all.
2. Specify top channel finish.
AA anodized aluminum and all
paint finishes are available
except 613 Silver.
Beams are anodized aluminum
only.
Complete base assemblies include
all base components necessary to
support worksurfaces. Specify
screens, power components and
cable trays separately. Base
assemblies include end legs,
intermediate leg (where required),
beams, trusses, cantilever brackets,
mid span support brackets, top
channel and end caps.
No table on this page has beams
longer than 15’.
Base assemblies correspond to:
10’: two 60x24D worksurfaces
12’: two 72x24D worksurfaces
15’: three 60X24D worksurfaces
18’: three 72x24D worksurfaces
20’: four 60x24D worksurfaces
24’: four 72x24D worksurfaces
25’: five 60x24D worksurfaces
262