Price List July 2012 - Knoll

Storage Anchored brackets
AutoStrada
description type pattern no. 49 h 64 h list
Bracket kit, cabinet to panel attachment
top and bottom connection for single cabinet
attachment to panel run
A3CPBS ( )( ) $123. $130.
kit includes hookstrip connector (not shown)
Bracket kit, cabinet to panel attachment
top and bottom connection for use with two
cabinets side by side or back to back attached
perpendicular to panel run
left A3CPBDL ( )( ) 221. 232.
right A3CPBDR ( )( ) 221. 232.
Note - one of the two cabinets should be 2.5 wider or deeper (width or depth dimension depending on style of
cabinet) than the other
Left hand shown, (kit includes hookstrip
connector not shown)
Order Code
Specification Information
Application Notes
Example: A3CPBS4
A3 AutoStrada, generation3
CPB Cabinet to Panel bracket
S Single
4 With 49h hookstrip
connector
() Finish
To order please specify pattern
number including:
1. Hand (if applicable)
L = left hand attachment
R = right hand attachment
2. Hookstrip connector height
2 = for 42h cabinet to panel
connection
4 = for 49h cabinet to panel
connection
6 = for 64h cabinet to panel
connection
3. Finish
Painted finish options only from
page7
Bracket kits for use when attaching
storage anchored cabinets to panels;
kit includes top and bottom bracket
as shown and ships with hookstrip
connector. Please be sure to specify
height to correspond with cabinet
and panel height. When one cabinet
perpendicular to panel run, use S
bracket; when two cabinets are side
by side and perpendicular to panel
run, use D bracket.
Brackets are NOT to be used with
Reff stacking modules. Only use for
cabinet to panel attachment (panel
and cabinet at same height) or with
cabinet to panel plus window
modules (overall at same height).
Painted finish 613 used when AA
trim finish specified.
Cabinets
175