09.04.2014 Views

HP Officejet 6500 (E709) All-in-One Series User Guide - Radio Shack

HP Officejet 6500 (E709) All-in-One Series User Guide - Radio Shack

HP Officejet 6500 (E709) All-in-One Series User Guide - Radio Shack

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 6<br />

To set the dial type via the device control panel<br />

Press Setup, press Basic Fax Setup, and then use the Tone or Pulse Dial<strong>in</strong>g<br />

option.<br />

To set the dial type via the embedded Web server<br />

1. Click the Sett<strong>in</strong>gs tab, and then click Basic Fax Setup <strong>in</strong> the left pane.<br />

2. Make a selection <strong>in</strong> the Tone or Pulse Dial<strong>in</strong>g drop-down menu.<br />

3. Click the Apply button.<br />

Set the redial options<br />

If the device was unable to send a fax because the receiv<strong>in</strong>g fax mach<strong>in</strong>e did not answer<br />

or was busy, the device attempts to redial based on the sett<strong>in</strong>gs for the busy-redial and<br />

no-answer-redial options. Use the follow<strong>in</strong>g procedure to turn the options on or off.<br />

• Busy redial: If this option is turned on, the device redials automatically if it receives<br />

a busy signal. The factory-set default for this option is ON.<br />

• No answer redial: If this option is turned on, the device redials automatically if the<br />

receiv<strong>in</strong>g fax mach<strong>in</strong>e does not answer. The factory-set default for this option is<br />

OFF.<br />

To set the redial options via the device control panel<br />

Press Setup, press Advanced Fax Setup, and then use the Busy Redial or No<br />

Answer Redial options.<br />

Set the fax speed<br />

To set the redial options via the embedded Web server<br />

1. Click the Sett<strong>in</strong>gs tab, and then click Advanced Fax Setup <strong>in</strong> the left pane.<br />

2. Make a selection <strong>in</strong> the Busy Redial and No Answer Redial drop-down menus.<br />

3. Click the Apply button.<br />

You can set the fax speed used to communicate between your device and other fax<br />

mach<strong>in</strong>es when send<strong>in</strong>g and receiv<strong>in</strong>g faxes. The default fax speed is Fast.<br />

If you use one of the follow<strong>in</strong>g, sett<strong>in</strong>g the fax speed to a slower speed might be required:<br />

• An Internet phone service<br />

• A PBX system<br />

• Fax over Internet Protocol (FoIP)<br />

• An <strong>in</strong>tegrated services digital network (ISDN) service<br />

If you experience problems send<strong>in</strong>g and receiv<strong>in</strong>g faxes, you might want to try sett<strong>in</strong>g the<br />

Fax Speed sett<strong>in</strong>g to Medium or Slow. The follow<strong>in</strong>g table provides the available fax<br />

speed sett<strong>in</strong>gs.<br />

Fax speed sett<strong>in</strong>g<br />

Fast<br />

Medium<br />

Fax speed<br />

v.34 (33600 baud)<br />

v.17 (14400 baud)<br />

74 Fax

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!