Characterization and control of the fiber-matrix interface in ceramic ...

192
155. M. F. Doerner and W, D. Nix, "A Method for Interpreting the
Data from Depth Sensing Indentation Instruments," J. Mater. Res. 1(4),
601-9 (July/August 1986).
156. D. B. Marshall and W. C. Oliver, "Measurement of Interfacial
Mechanical Properties in Fiber-Reinforced Ceramic Composites," J. Am.
Cerarn. Soc. 70(8), 542-8 (1987).
157. W. C. Oliver, "Progress in the Developments of a Mechanical
Properties Microprobe," MRS Bull. 5, 15-19, (1986).
158. E. Fueller, T. Coyle, D. Cranmer, and R. A. Lowden,
"Characterization of the Fiber/Matrix Interface by Instrumented
Indentation Testing," presented at the 90th Annual Meeting of the
American Ceramic Society, May 1988.
159. K. T. Faber et al., "Frictional Stress Evaluation Along the
Fiber-Matrix Interface in Ceramic Matrix Composites," J. Ani. Ceram. Soc
69(9), C208-9 (1986).
160. D. K. Shetty, "Shear-Lag Analysis of Fiber Push-Out.
(Indentation) Tests for Estimating Interfacial Frictional Stress in
Ceramic Matrix Composites," J . Am. Ceram. SOC. 71(2), C107-9 (1988).
161. Personal communications with K. Griffith, Ceramatec, Inc.,
Salt Lake City, Utah, to R. A. Lowden.
162. C. H. Hsueh, "An Analytical Evaluation of Interfacial Shear
Strength for Fiber Reinforced Ceramic Composites, " to be published in
J. Mater. Sc.i.
163. C. H. Hsueh, "Elastic Load Transfer from Partially Embedded
Axial Loaded Fiber to Matrix'! to be published in J. Amer. Cerani. SOC.
164. Y. Termonia, "Theoretical Study of the Stress Transfer in
Single Fibre Composites," J. Mater. Sci. 22, 504-8 (1987).
165. D. B. Marshall and A. G . Evans, "Failure Mechanisms in
Ceramic-Fiber/Ceramic-Matrix Composites," J. Amer. Ceram. Soc. 68(5),
225-31 (1.985).
166. D. J. Hannant, "Fibre Reinforced Cements," pp. 429-500 in
Handbook of Composites, Volume 4 - Fabrication of Composites, edited by
A. Kelly and S. T. Mileiko, Elsevier Science Publishers B. V., North-
Holland, The Netherlands, 1983.
167. P. K. Mallick, "Mechanics," pp. 73-167 in Fiber-Reinforced
Composites, Marcell Dekker, Inc., New York, 1988.