Sun Fire V445 Server Administration Guide - SCN Research

▼
▼
To Access the System Console With an Alphanumeric Terminal Through
the Serial Management Port 51
To Access the System Console With an Alphanumeric Terminal Through
the TTYB Port 52
Verifying Serial Port Settings on TTYB 53
▼ To Verify Serial Port Settings on TTYB 53
Accessing the System Console With a Local Graphics Monitor 54
▼ To Access the System Console With a Local Graphics Monitor 54
Reference for System Console OpenBoot Configuration Variable Settings 56
3. Powering On and Powering Off the System 57
Before You Begin 57
Powering On the Server Remotely 58
▼ To Power On the Server Remotely 58
Powering On the Server Locally 59
▼ To Power On the Server Locally 59
Powering Off the System Remotely 60
▼ To Power Off the System Remotely From the ok Prompt 61
▼
To Power Off the System Remotely From the ALOM System Controller
Prompt 61
Powering Off the Server Locally 62
▼ To Power Off the Server Locally 62
Initiating a Reconfiguration Boot 62
▼ To Initiate a Reconfiguration Boot 63
Selecting a Boot Device 65
▼ To Select a Boot Device 65
4. Configuring Hardware 67
About the CPU/Memory Modules 67
DIMMs 68
vi Sun Fire V445 Server Administration Guide • August 2006