X9DR3_i-LN4F+ 1.1.indb - Supermicro
X9DR3_i-LN4F+ 1.1.indb - Supermicro
X9DR3_i-LN4F+ 1.1.indb - Supermicro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>X9DR3</strong>-<strong>LN4F+</strong>/X9DRi-<strong>LN4F+</strong> Motherboard User’s Manual<br />
AddOn ROM Display Mode<br />
Use this item to set the display mode for the Option ROM. Select Keep Current to<br />
use the current AddOn ROM Display setting. Select Force BIOS to use the Option<br />
ROM display mode set by the system BIOS. The options are Force BIOS and<br />
Keep Current.<br />
Bootup Num-Lock<br />
Use this feature to set the Power-on state for the Numlock key. The options are<br />
Off and On.<br />
Wait For 'F1' If Error<br />
Select Enabled to force the system to wait until the key is pressed if an error<br />
occurs. The options are Disabled and Enabled.<br />
Interrupt 19 Capture<br />
Interrupt 19 is the software interrupt that handles the boot disk function. When this<br />
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19<br />
at bootup and allow the drives that are attached to these host adaptors to function<br />
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adaptors<br />
will not capture Interrupt 19, and the drives attached to these adaptors will not<br />
function as bootable devices. The options are Enabled and Disabled.<br />
Re-try Boot<br />
If this item is enabled, the BIOS will automatically reboot the system from a specified<br />
boot device after its initial boot failure. The options are Disabled, Legacy<br />
Boot, and EFI Boot.<br />
Power Configuration<br />
Watch Dog Function<br />
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive<br />
for more than 5 minutes. The options are Enabled and Disabled.<br />
Power Button Function<br />
If this feature is set to Instant Off, the system will power off immediately as soon<br />
as the user presses the power button. If this feature is set to 4 Seconds Override,<br />
the system will power off when the user presses the power button for 4 seconds or<br />
longer. The options are Instant Off and 4 Seconds Override.<br />
Restore on AC Power Loss<br />
Use this feature to set the power state after a power outage. Select Power-Off for<br />
the system power to remain off after a power loss. Select Power-On for the system<br />
4-4