Medium resolution

More documents

Recommendations

Info

Creating zones 5. for land use plans How to create zones with QGIS • Now, zones made on the 3D model will be created on the layer current land use. At the moment, there is only one polygon in the village, namely that showing the whole village area. The goal is to create as many polygons as zones created by the villagers on the 3D model during current land use zoning. • Zones can be created in two ways with the Split Features tool (the “scissor icon” in the Advanced digitalizing toolbar) : These are (i) when a zone is not included in another zone and (ii) when the zone to be created is included in another zone. • Click on the current land use layer. • Click on Toggle editing , and then on Select Features . • Select the zone that contains the zone that needs to be “cut”. Once selected, the zone is coloured differently. • You need to delineate the zone, starting from outside shown by below and finishing at outside the zone you selected. How to create zones not included in another zone • We want to cut out the zone indicated by the arrows. • Once the delineation is finished, left click. The zone should then appear. • Then click on Split Features.
Tip Sometimes, unwanted artefacts appear such as the line in the following example. In this case it should be removed. To do so, use the Node Tool. By clicking on any “bothersome points”, they can be easily moved and merged with another line to hide them. Creating zones 5. for land use plans How to create zones with QGIS How to create zones included in another zone • Sometimes, the zone to be created is isolated from other zones. For example, the zone delineated by blue string in the example shown below. Stage 1 • You need first to create a zone using the same technique as that described in the paragraph 0. However in this case the whole zone is not delineated as shown below. TOOLBOX 6 QGIS for land use planning Stage 2 • Then you need to “cut” the zone that has not yet been delineated. To do so select the zone • In this particular case, the zone creation process is different. 77
Page 1 and 2:
HANDBOOK PARTICIPATORY LAND USE PLA
Page 3 and 4:
FOREWORD At the end of 2009, a manu
Page 5 and 6:
Participatory Land Use Planning HAN
Page 7 and 8:
MORNING Team Day 1 Day 2 Day 3 Day
Page 9:
Land zoning and management plan to
Page 12 and 13:
Characterizing the 3. village land
Page 14 and 15:
Engaging local communities 4. in PL
Page 16 and 17:
Engaging local communities 4. in PL
Page 18 and 19:
Three dimensional (3D) 5. model con
Page 20 and 21:
Three dimensional (3D) 5. model con
Page 22 and 23:
7. Land zoning 7.1 The art of land
Page 24 and 25:
7. Land zoning During the zoning pr
Page 26 and 27:
8. Village action plan 8.1 What is
Page 28 and 29: Preparation of 9. the PLUP agreemen
Page 30 and 31: Preparation of 9. the PLUP agreemen
Page 32 and 33: Data compilation, 11. synthesis and
Page 38 and 39: Proposal for communal 12 . land reg
Page 40 and 41: 13. PLUP Monitoring Monitoring is a
Page 42 and 43: Conclusion In this Handbook as in t
Page 44 and 45: Participatory Land Use Planning (PL
Page 46 and 47: Per diem for district 2. staff and
Page 48 and 49: Participatory Land Use Planning TOO
Page 50 and 51: 2. To complete the “description o
Page 52 and 53: 2. To complete the “description o
Page 54 and 55: 3. ‘PLUP Fiction’ role play ‘
Page 56 and 57: FOR MORE INFORMATION Castella J.C.
Page 58 and 59: Participatory Land Use Planning TOO
Page 60 and 61: Drawing the contour lines 2. on the
Page 62 and 63: 5. Scenario analyses with Excel spr
Page 65 and 66: Important point The calculated numb
Page 67 and 68: 1. Getting started Organizing spati
Page 69 and 70: 2. Creating the master map Visualiz
Page 71 and 72: Example In the picture below, the l
Page 73 and 74: Important point The photo need to b
Page 75 and 76: 4. Create the polygon of the villag
Page 77: Creating zones 5. for land use plan
Page 81: Important point $area gives a resul
Page 84 and 85: THE LAND 6. USE MAPS Map layers pre
Page 86 and 87: THE LAND 6. USE MAPS Export the ima
Page 88 and 89: 7. QGIS for P3DM How to extract con
Page 90 and 91: 7. Synthesising PLUP knowledge in a
Page 92 and 93: 1. Entering data 1.3 Importing data
Page 94 and 95: 2. Producing a monograph 6. Add the
Page 96 and 97: 2. Producing a monograph 8. Add a p
show all

Medium resolution

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?