Telemetry Module MT-102 User's Manual - BlueNote Communications

More documents

Recommendations

Info

13.2.2.2.4. Configuration for NMEA 0183 mode In NMEA 0183 mode, <strong>MT</strong>-<strong>102</strong> module monitors information delivered by weather stations like AIRMAR to PORT 2, which is stored in register memory space. Beyond localization parameters from integrated GPS Receiver, AIRMAR station delivers parameters like: temperature, pressure, humidity, speed and direction of wind. Full range of variables delivered by this device is to be found in chapter additional resources for NMEA 0183 mode. 13.3. Syntax for reading and writing data in SMS mode Basic syntax: Reading #[representation][internal resource]/[% space address] Writing #[representation][internal resource]/[% space address]=value 133
The value may be variable or constant. It is for example possible to send an SMS resulting in assigning the state of I1 to Q1 (#Q1=I1 or #Q1=#I1). Using second form replaces #I1 with the current value f.e. #Q1=1. In first version the proper execution will be confirmed with identical syntax. Value representation (the way of displaying or interpreting of the value) D or none decimally H hexadecimally (for registers always in four digits f.e. 002F) B binary (for registers always in 16 digits f.e. 0000000000010111) S string (read only). Presents ASCII text stored in registers. NULL (0x0000) character should be used as end of string marker. Internal resource Qx state of output Qx, x in range 1...8 Anx analogue input, x in range 1...2 % space address - access to internal variables I-bits in binary inputs space Q-bits in binary outputs space AI-Input Registers (16 bit) R-Internal Registers (16 bit) M-internal flags (Not deleted and zeroed during module reset) S-internal flags (deleted and zeroed during module reset) Examples of syntax that may along with simple text be a part of the SMS. #Q3 state of terminal Q3 #DQ5 state of terminal Q5 decimally #AN1 value of analogue input AN1 decimally #BAN2 value of analogue input AN2 binary #%R15 value of Register 15 decimally #H%AI4 value of Input Register 4 #%M123 value of M123 flag #H%R80#H%R81 value of 32 bit Register DREG1 (memory map) 16 bit #Q1=1 activation of output Q1 #%R70=255 setting Register R70 to value of 255 #H%R70=FF setting Register R70 to value 255 #%R1000=2 #%R70=100000 #S%R64 faulty resource address, replay „Err” faulty value, reply #%R70=Err text coded in ASCII beginning in internal register which address is 64 decimally and ending in first following register with NULL sign (0x0000). An example of SMS composed by the user may look as follows: „state on input Pump 1 - #%I3” „Coolant temperature - #AN1” 134
Page 1 and 2:
TelemetryModule MT-102 UserManual t
Page 3 and 4:
MT-102 © 2010 Inventia Ltd. Wszelk
Page 5 and 6:
2 8.2. PARAMETER GROUPS ...........
Page 7 and 8:
4 8.2.6.2.1.2.2.6. Alarm HiHi .....
Page 9 and 10:
10.1.6. PORT 2 activity ...........
Page 11 and 12:
1. Introduction Despite the explosi
Page 13 and 14:
4.2. Resources MT-102 module's reso
Page 15 and 16:
Transmission parameters are: speed
Page 17 and 18:
4.3.6. MT2MT buffer MT2MT buffer en
Page 19 and 20:
As shown by graph, the value at whi
Page 21 and 22:
Binary inputs Q1…Q8 - in positive
Page 23 and 24:
PORT 2 (RS-232/422/485 - communicat
Page 25 and 26:
part. Even with no SIM inserted, th
Page 27 and 28:
Properly inserted SIM cards secure
Page 29 and 30:
packet routing - useful for unambig
Page 31 and 32:
7.5. Modem mode In this mode, the m
Page 33 and 34:
This mode was implemented due to re
Page 35 and 36:
Authorized numbers group - contains
Page 37 and 38:
NOTICE! Availability of parameters
Page 39 and 40:
List - All Unrestricted access for
Page 41 and 42:
8.2.2.12. Use of SMS Function - def
Page 43 and 44:
8.2.3.5. IP assignment Function - s
Page 45 and 46:
Range - 0.0.0.0 - 255.255.255.255 D
Page 47 and 48:
Comments - The range value defines
Page 49 and 50:
Comments - n/a 8.2.5.1.1.2. Data pa
Page 51 and 52:
number ID - ID number of device con
Page 53 and 54:
8.2.5.4.2. Delay after error in com
Page 55 and 56:
8.2.5.4.3.7. Force write the whole
Page 57 and 58:
Comments - value 0 (zero) forces ma
Page 59 and 60:
No Current data reading inactive De
Page 61 and 62:
8.2.5.7.7. Number of transmission r
Page 63 and 64:
8.2.5.9.2. Data packet delimiter Fu
Page 65 and 66:
It is recommended to set filtering
Page 67 and 68:
8.2.6.2.1.2.2.9. Alarm LoLo Functio
Page 69 and 70:
8.2.6.2.2.1. Name Function - allows
Page 71 and 72:
Default value - 0 [engineering unit
Page 73 and 74:
Comments - Function has no influenc
Page 75 and 76:
List - Auto Data collected in Logge
Page 77 and 78:
Default value - 0 Comments - n/a 8.
Page 79 and 80:
Default value - . Comments - if the
Page 81 and 82:
Default value - Bi In 0->1, Bi In 1
Page 83 and 84:
8.2.7.3.2. Number of trials Functio
Page 85 and 86: For remote configuration, it is vit
Page 87 and 88: RS-232 Port Contains number of the
Page 89 and 90: Nie można wyświetlić połączone
Page 91 and 92: and after connecting to the module
Page 93 and 94: The icon on the toolbar performs sa
Page 95 and 96: “If” - defines the condition fo
Page 97 and 98: Detailed description of standard an
Page 99 and 100: Multiply X by Y store result (regis
Page 101 and 102: Mask test This function verifies wh
Page 103 and 104: Both 16 and 32 bit registers can be
Page 105 and 106: get Y: - unit number defines the nu
Page 107 and 108: CAUTION! All variables in Modbus ad
Page 109 and 110: 9.12. Downloding the program After
Page 111 and 112: 9.14.4. 2 pumps alternating action
Page 113 and 114: The same effect can be obtained in
Page 115 and 116: 9.14.8. Logger program An example o
Page 117 and 118: 10.1.3. GSM status GSM Status LEDs
Page 119 and 120: 10.1.6. PORT 2 activity LED indicat
Page 121 and 122: 10.1.8. SET1, SET2 alarm thresholds
Page 123 and 124: When GPRS LED is off the module is
Page 125 and 126: 11. Technical data 11.1. General Di
Page 127 and 128: Analogue inputs AN3 … AN6: Measur
Page 129 and 130: 12. Safety informations 12.1. Worki
Page 131 and 132: 13.1.3.1. Advantages of GPRS techno
Page 133 and 134: 13.2.2. Point to point communicatio
Page 135: without decoding of protocol. This
Page 139 and 140: comment: 13.6. Data forma
Page 141 and 142: 13.8. Trigger inputs During operati
Page 143 and 144: 13.10. RM-120 Converter module RM-1
Page 145 and 146: 142 0x0050 AQ1_LoLo AQ1_Lo AQ1_Hi A
Page 147 and 148: 144 0x0388 MT2MT_20 MT2MT_21 9 0 0x
Page 149 and 150: 13.11.3. Analogue inputs space Inpu
Page 151 and 152: 13.11.4. Internal registers space I
Page 153 and 154: 150 0x0267 Dead band threshold AQ8
Page 155 and 156: 0x11E 286 30287 MC2VAR8_H 0x11F 287
Page 157 and 158: 13.11.6. Auxiliary resources for M-
Page 159 and 160: Offset Type Rx[High,Low] Descriptio
Page 161 and 162: Start Address hex dec MODBUS Descri
Page 163 and 164: All values are stored in 2 16 bit r
Page 165: Address 0x418 (1048) Modbus (41049)
show all

Telemetry Module MT-102 User's Manual - BlueNote Communications

Create successful ePaper yourself

Delete template?

Save as template?