Telemetry Module MT-102 User's Manual - BlueNote Communications

8.2.7.1.2. SMS sending rule
Each of the rules residing on the list is defined by following parameters:
Trigger input
Trigger flag
Status sending
SMS text
Recipient number
8.2.7.1.2.1. Trigger input
Function - defines resource to observe
Data type - selection list
List - n/a
the rule is inactive
Q1…Q8
binary inputs/outputs
A1…A6
analogue inputs
FS1_ups, FS1_q+, FS1_gprs
system trigger inputs
P1…P32
user program inputs
TMR1…TMR4
synchronous and asynchronous clocks trigger inputs
Default value - n/a
Comments - more about trigger inputs and flags in chapter Appendices
8.2.7.1.2.2. Trigger flag
Function - defines event-triggering flag associated with selected trigger input
Data type - selection list
Range - n/a
rule inactive
Bi In 0->1, Bi In 1->0 Bi In Chg
binary input state change
Bi Out Err
discrepancy between the forcing and output state
Counter
counter flip over (up or down)
An LoLo, An Lo, An Hi, An HiHi, An Set Fall, An Set Rise An DB
alarm threshold flags for analogue inputs signals
Default value - n/a
Comments - more about trigger inputs and flags in chapter Appendices
8.2.7.1.2.3. SMS text
Function - allows entering text sent in message triggered by defined rule
Data type - text
Range - letters, numerals, special characters - max. length: 160
characters
75