Telemetry Module MT-102 User's Manual - BlueNote Communications
Telemetry Module MT-102 User's Manual - BlueNote Communications
Telemetry Module MT-102 User's Manual - BlueNote Communications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Default value - .<br />
Comments - if the message will include the status of the module, total length<br />
of SMS text and the status may not exceed 160 characters. If the<br />
length is greater, the text will be truncated so that full status is<br />
sent.<br />
8.2.7.1.2.4. Recipient number<br />
Function - selects message recipient number<br />
Data type - selection list<br />
List - friendly names of recipients associated with phone numbers in<br />
Authorized numbers list<br />
Default value - NUM 1 - first number on the list<br />
Comments - since recipient's phone number is selected from the list of friendly<br />
names, it is important to enter unique, unambiguous names<br />
facilitating identification.<br />
8.2.7.1.2.5. Sending additional information<br />
Function - selects whether module status is to be attached to the message.<br />
Data type - List<br />
List - Status and timestamp<br />
Status and timestamp attached to SMS<br />
Timestamp<br />
Timestamp attached to SMS<br />
None<br />
Only SMS text is send<br />
Default value - Status and timestamp<br />
Comments - Total length of SMS text and additional information may not<br />
exceed 160 characters. If the length is greater, the text defined<br />
by user will be truncated so that additional information will be<br />
sent.<br />
8.2.7.2. Data sending<br />
List of SMS sending rules can hold max. 32 entries defining data transmission conditions. A<br />
defined data block or Status will be sent to appointed IP address. Adding a new position is<br />
done in the context menu by right-clicking mouse while one of positions on the list is<br />
highlighted.<br />
76