UNIVERGE UC700 - NEC Corporation of America

UNIVERGE UC700 Server Installation 2-13
Step 5
Step 6
Enter the reserved Number and select the Tenant number from the
drop-down list. Set the Monitored Number as the Reserved Type and
Oai Server as the Application.
Do one of the following:
—Click Apply or Apply & Add New to save the voice mail pilot number
without exiting the dialog box.
—Click Done to save the voice mail pilot number and exit the dialog box.
—Click Cancel to exit the dialog box without saving the voice mail pilot
number.
Adding a Voice Mail Pilot Number
A voice mail pilot number is required to redirect an incoming call to
voice mail. Follow the steps below to set the voice mail pilot number:
Step 1
Select the Voice Mail Pilot Numbers tab from the PBX Configuration
dialog box (Figure 2-16).
This action displays a Voice Mail Pilot Numbers dialog box (Figure 2-18),
allowing you to add or edit one or more voice mail pilot numbers.
Figure 2-18 Voice Mail Pilot Numbers dialog
Step 2
Click Add New Pilot Number. Figure 2-17 displays.
Figure 2-19 Add New Pilot Number
Step 3
Step 4
Enter the number to reserve for UC700 voice mail routing in the Pilot
Number field.
Do one of the following:
UCE Desktop Client/Agent (UNIVERGE UC700) Installation Guide - Revision 4.01