UNIVERGE UC700 - NEC Corporation of America

2-14 UNIVERGE UC700 Server Installation
Step 5
Step 6
—Click Apply to save the voice mail pilot number without exiting the
dialog box.
—Click Done to save the voice mail pilot number and exit the dialog box.
—Click Cancel to exit the dialog box without saving the voice mail pilot
number.
To change the default voice mail pilot number, click Set Default next to
the pilot number to be the new default pilot number.
—The default pilot number displays in bold face.
—The default pilot number is used when a client does not specify the
voice mail pilot number.
To delete a Voice Mail Pilot Number, click the trash can icon.
Adding a Redirect Number
A Redirect Number is required when using a contact rule. To add a
Redirect Number, follow the steps below.
Step 1
Click the Pencil icon next to the selected PBX, then click the Reserved
Numbers tab. Figure 2-20 displays.
Figure 2-20 PBX Settings—Add New Monitored Number dialog
Step 2
Click the Add New Monitored Number button. Figure 2-21 displays.
Figure 2-21 Add New Monitored Number dialog
Step 3
Enter the Number and Tenant. Select Monitored Number for the
Reserved Type, and Un-Assigned for the Application.
UCE Desktop Client/Agent (UNIVERGE UC700) Installation Guide - Revision 4.01