iDEAl EsPRit - Ideal Heating
iDEAl EsPRit - Ideal Heating
iDEAl EsPRit - Ideal Heating
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION<br />
24<br />
3<br />
INSTALLATION<br />
24 CONNECTING THE FLUE TO THE BOILER<br />
Note. Before fitting the flue turret fill the condensate trap within the<br />
boiler by pouring a cupful of water into the flue outlet A.<br />
Take care to ensure that the water is only poured into the flue<br />
outlet, and does not spill into the boiler casing.<br />
1. Locate the flue into the turret.<br />
2. Insert the flue assembly through the prepared hole in the<br />
wall. Push through and pull back to seal against outside<br />
wall face.<br />
3. Locate the flue turret on the top of the boiler, ensuring that<br />
the turret gasket is in place. Also ensure the turret is<br />
located concentric with the flue aperture on the boiler top<br />
panel. Check that the flue seal located in the top of the flue<br />
manifold is secure and giving an effective seal.<br />
4. Secure the flue turret on top of the boiler by inserting the<br />
open ends of the turret clamp under the 2 studs and fixing<br />
it in the middle with the single M5 x 10mm pozi-hex screw<br />
provided.<br />
5. Flues over 1 metre long.<br />
Fix the flue support bracket to the wall, using the 4 wall<br />
plugs and wood screws.<br />
NB. The space bracket will utilise one fixing hole only<br />
whilst used in conjunction with the stand-off option.<br />
1<br />
2<br />
esp8824<br />
Esprit - Installation and Servicing
Change language