SB-10 USER'S MANUAL

• ;yHNGE
THE LINE SPACING TO nI60THS OF AN
This command allows you to select the line spacing you want,
to n/60ths of an inch. You may choose a value for “n” between
0 and 255.
CODE: A “t-t”
HEX:
DECIMAL:
BASIC:
1B 41 “n”
27 65 “n”
CHR$(27) CHR$(65) CHR$(n)
REFERENCE: 0, 1, cESC> 2, a “n”,
3 “n”, J “n”, j ‘In”,
Section 5.
• CHANGE THE LINE SPACING TO nl120THS OF AN
INCH
This command allows you to select the line spacing you want,
to nll20ths of an inch. You may choose a value for “n” between
0 and 255.
CODE: 3 “n”
-.-.-
-
-
-
HEX:
DECIMAL:
BASIC:
1B 33 “n”
27 51 “n”
CHR$(27) CHR$(51) CHR$(n)
-
REFERENCE: 0, 1, 2, a “n”, - --
< ESC > A “n”, < ESC > J “n”, < ESC > j ‘In”,
-
Section 5.
-
74
-