SB-10 USER'S MANUAL

.
H SELECT MASTER PRINT MODE
With this command, you can select one of 16 unique print mode
combinations shown in Table A-l, for the value of “n”.(You may
choose for “r-t” any number between 0 and 255.) This command
precedes other commands (such as < ESC > G, etc.) which set the
print mode.
*
CODE: ! “n”
*
HEX:
1921 “n”
L
DECIMAL:
27 33 “n”
L
BASIC:
CHR$(27) CHR$(33) CHR$(n)
REFERENCE: < ESC > ,