SB-10 USER'S MANUAL

More documents

Recommendations

Info

• CANCEL EXPANDED PRINT Resets the print size to the pitch in use before expanded began. print CODE: W 0 HEX: lB5700 DECIMAL: 27 87 0 BASIC: CHR$(27) CHR$(87) CHR$(O) REFERENCE: < ESC > W 1, Section 4. • SELECT DOUBLE-STRIKE PRINTING After this command is sent, all characters will be printed in the double-strike mode. CODE: G HEX: lB47 DECIMAL: 27 71 BASIC: CHR$(27) CHR$(71) REFERENCE: < ESC > H, Section 4. w CANCEL DOUBLE-STRIKE PRlNTlNG This command returns printer to normal printing, canceling the double-strike mode. CODE: H HEX: lB48 DECIMAL: 27 72 BASIC: CHR$(27) CHR$(72) REFERENCE: < ESC > G, Section 4 67
• SELECT EMPHASIZED PRINTING This command causes all subsequent characters to be printed in the emphasized mode. CODE: E HEX: lB45 DECIMAL: 27 69 BASIC: CHR$(27) CHR!$(69) REFERENCE: < ESC > F. Section 4. w CANCEL EMPHASIZED PRINTING Returns normal printing, canceling the emphasized print mode. CODE: F HEX: lB46 DECIMAL: 27 70 BASIC: CHR$(27) CHR$(70) REFERENCE: < ESC > E. Section 4. • SELECT UNDERLINING After this command is given, all characters will be underlined until this function is canceled. CODE: - 1 HEX: lB2DOl DECIMAL: 27 45 1 BASIC: CHRS(27) CHR$(45) CHR$(l) REFERENCE: < ESC > - 0, Section 4. 68
Page 1 and 2: - \ - - - - - - - - -
Page 3 and 4: FONT STYLES AND PRINT CONTROLS -
Page 5 and 6: • CANCEL PROPORTIONAL SPAClNG Thi
Page 7: w SELECT EXPANDED PRINT This instru
Page 11 and 12: • CANCEL SUPERSCRIPTS AND SUBSCRI
Page 13 and 14: • REVERSE THE PAPER ONE LINE (REV
Page 15 and 16: • ;yHNGE THE LINE SPACING TO nI60
Page 17 and 18: • ADVANCE PAPER TO TOP OF NEXT PA
Page 19 and 20: • SET THE BOTTOM MARGlN With this
Page 21 and 22: • ADVANCE THE PAPER “n” LINES
Page 23 and 24: • SET THE LEFT MARGIN You can use
Page 25 and 26: I SKIP HORIZONTAL TAB POSITIONS Cau
Page 27 and 28: • PRINT 24-BIT GRAPHICS - With th
Page 29 and 30: Table A-l. Options for the master p
Page 31 and 32: • scELLTHE VALUE OF THE 8TH DATA
Page 33 and 34: • DISABLE THE PRINTER BELL This c
Page 35 and 36: • SELECT INCREMENTAL MODE This co
Page 37 and 38: Printer Installation Menu contains
Page 39 and 40: • USER FUNCTIONS Once you have en
Page 41 and 42: MEMO -- -.
Page 43 and 44: STANDARD ASCII CODES DECIMAL HEXADE
Page 45 and 46: STANDARD ASCII CODES DECIMAL HEXADE
Page 47 and 48: - STANDARD ASCII CODES DECIMAL HEXA
Page 49 and 50: MEMO - - - 108
Page 51 and 52: 2-l Selection of 2-2 international
Page 53 and 54: Decimal Character 54 6 6 91 55 7 7
Page 55 and 56: Decimal Character 208 1. 209 i 270
Page 57 and 58: Graphics Data : i I ] 7.bit Interfa
Page 59 and 60:
• PRINTING 8-61-r GRAPHICS In 8-b
Page 61 and 62:
70 NEXT J 80 FOR J==6 TO 0 STEP -1
Page 63 and 64:
140 DATA 1,,2,4,12,8,16,16,48,32 15
Page 65 and 66:
A! LINE 70 LINE 80 LINE 90 Prints t
Page 67 and 68:
Character matrix 24 dot x 13 dot st
Page 69 and 70:
• SERIAL INTERFACE(OPTIONAL) Inte
Page 71 and 72:
ACK I I I ;-$-_I DATA ; 9p5ec. Appr
Page 73 and 74:
• THE SERIAL INTERFACE(OPTlONAL)
Page 75 and 76:
Serial busy protocols In these prot
Page 77 and 78:
Table H-3. Connector signals for th
Page 79 and 80:
• Hexadecimal codes18 Horizontal
Page 81 and 82:
Federal Communications Commission R
Page 83 and 84:
shipping costs incurred in presenti
Page 85 and 86:
COMMAND QUICK REFERENCE Print Sty/e
Page 87:
! c L / I Graphics Controls yun,u
show all

SB-10 USER'S MANUAL

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?