DELTA Switches and Socket Outlets Catalog ET D1 · 2011 - Sobel.rs

© Siemens AG 2011
Surface-Mounting Product Ranges
DELTA fläche IP44
Introduction
9
Simple installation
The DELTA fläche product range has been thought through
down to the very last detail: the cover on the SCHUKO ® socket
outlet and the switch and pushbutton are screwed to the base
with two rustproof screws. At the back of the switches, pushbuttons
and socket outlets are two diagonal 4.5 mm drill holes for
slot mounting. Slide nipples facilitate cable entry. All switches
and pushbuttons can be equipped with glow lamps in three
brightness levels. Multiple combinations of SCHUKO ® socket
outlets are supplied fully wired. We continue to produce combined
device applications for SCHUKO ® switches and socket
outlets.
A full product range for two-way switches, switches with pilot
lamp, pushbuttons, light signals, SCHUKO ® socket outlets, and
combined double and triple device applications is provided.
DIN VDE and DIN-compliant technology
The switches and pushbuttons in the splash-proof DELTA fläche
range are built to DIN VDE 0632 and DIN 49200, while the socket
outlets are built to DIN VDE 0620 and DIN 49440, and carry the
VDE mark. The devices offer degree of protection IP44 and are
splash-proof. The switches and pushbuttons can be used with
up to 10 A and 250 V AC, and the SCHUKO ® socket outlets with
16 A, 250 V AC and 10 A, 250 V DC.
Siemens ET D1 · 10/2010
9/11