DELTA Switches and Socket Outlets Catalog ET D1 · 2011 - Sobel.rs

© Siemens AG 2011
Smoke Detectors
Smoke detectors
Version DT Order No. Price
per PU
PU
(UNIT,
SET,
M)
PS*/
P. unit
PG
5TC1 296
DELTA reflex SD230N smoke detectors
• 230 V-operated smoke detector incl. 9 V backup battery with
VdS certification (suitable for networking)
• The smoke detector detects smoke from fires and gives early warning.
• As well as using the smoke detector on its own, it is also possible to
network up to 38 smoke detectors of the same type
• Battery change display for 30 days
• Battery compartment check
• Test button for function test
• Titanium white (similar to RAL 9010)
A 5TC1 296 1 1 unit 024
Technical specifications
• Power supply
230 V AC and 9 V alkaline backup battery
(included in delivery)
• Networking
Up to 38 smoke detectors of the same
type
• Signaling
Acoustic signal transducer:
horn > 85 dB(A)
Optical indicator: red LED
• Temperature range 0 .... +50 °C
• Dimensions (Ø x H) 111 mm x 40 mm
• Mounting
Surface mounting with or without surfacemounting
box (see accessories)
• Degree of protection IP20
•Approvals VdS certification acc. to EN 14604 10/05
Outlet boxes for "DELTA reflex SD230N smoke detectors"
• Surface-mounting box for SD230N smoke detector
• Dimensions: 93 mm x 27 mm
• The outlet box is required if no flush-mounting box to hold the 230 V
connector is provided
• Titanium white (similar to RAL 9010)
A 5TC1 297 1 1 unit 024
5TC1 297
5TC1 291
DELTA reflex smoke detector modules "Relais"
• The DELTA reflex smoke detector "Batterie" can also be equipped with
a relay module
• The relay module enables the operation of alarm devices such as
horns, sirens, warning lights etc. or connection to the GAMMA instabus
building management systems
• The potential-free changeover contact (NC contact and NO contact)
can also be used to set up closed-circuit protection (alarm loops with
NC contact)
• The contacts of the relay are configured through a triple plug-in terminal
• The relay module is powered (3 to 5 V) through the interface of the
smoke detector
A 5TC1 291 1 1 unit 024
Technical specifications
• Operational voltage
• Relay switching voltage
• Relay switching current
• Relay contacts
•Terminals
• Mounting
• Connection
Note
3 ... 5 V
Max. 30 V DC / 42 V AC
Max. 1 A DC / 0.5 A AC
Changeover contact (NC and NO contacts)
Max. 0.6 mm Ø
Can only be used in the DELTA reflex
smoke detector "Batterie"
Using 8-pole plug connector
The externally connected signaling devices must have their own power
supply.
17
* You can order this quantity or a multiple thereof.
Siemens ET D1 · 10/2010
17/3