DELTA Switches and Socket Outlets Catalog ET D1 · 2011 - Sobel.rs

© Siemens AG 2011
Technical Information
Motion detectors
Comfort motion detector tops
The 2.20 m lens
Recommended mounting height
The lens has three ranges of sensing levels, so that the sensing range is
divided into near, medium and distant range.
2,20 m
8°
17°
65°
80°
I2_12398
Level 3
2,30 m
4,30 m
Level 1
Level 2
6,40 m
12,00 m
3,90 m
8,10 m
1 & % '
Mode of operation of the 2.20 m lens
1 & &
1 & &
Sensing range of the 2.20 m lens
Avoidance of sources of interference
In order to avoid unintended switching operations, the following
instructions should be complied with during installation:
• As a result of the thermal radiation from the lighting or an insufficient
distance between the motion detector and the lamp,
an undefined switch-on operation may be initiated.
Use of the plug-on blind
=
=
The sensing levels of the 2.20 m lens arranged from the top to the bottom
The mounting height generally amounts to 2.20 or 1.10 m.
If a mounting height higher than 2.20 m is selected, please note
that under certain circumstances the energy radiated by a more
distant heat signal source is not sufficient to release the motion
detector top.
The lens has a sensing range with an opening angle of 180° in
three levels. The three levels are directed from top to bottom.
The size of the sensing range equals
• For a mounting height of 2.20 m: approx. 12 m x 12 m
• For an mounting height of 1.10 m: approx. 6 m x 6 m
• When selecting the mounting location, it should be ensured
that no sources of interference, e.g. lamps or heaters are positioned
within the sensing field. If this is not possible, a plugon
blind should be used.
(1,10 m)
2
1
(2,20 m)
3
2
1
I2_08793
1
2
3
Sensing range
Suppressed range
Blind
Using the plug-on blind, sources of interference can be suppressed
by narrowing the sensing range. The blind covers 90°
of the left or right sensing range.
19
Siemens ET D1 · 10/2010
19/39