DELTA Switches and Socket Outlets Catalog ET D1 · 2011 - Sobel.rs

Technical Information
Shutter/Blind Controls
© Siemens AG 2011
19
Comfort shutter/blind controls
■ Programming
Operating and display elements
20
19
18
17
16
15
Uhr
Dat
1
2
3
4
5
6
7
8
9
14
Factory settings
1 2 3 4 5 6
Prog Zufall Astro
Mode
A,B,C,/,Hand
13
While program memories A and B are factory-assigned, they
can also be user-defined if required. Operating times that are no
longer required must be deleted.
Default factory settings:
• Memory A
- Switching time 1: 07:00, Mo to Fr, astro function active
- Switching time 2: 09:00, Sa to Su, astro function active
- Switching time 3: 20:00, Mo to Fr, astro function active
- Switching time 4: 21:00, Sa to Su, astro function active
• Memory B
- Switching time 1: 07:00, Mo to Fr, astro function not active
- Switching time 2: 09:00, Sa to Su, astro function not active
- Switching time 3: 20:00, Mo to Fr, astro function not active
- Switching time 4: 21:00, Sa to Su, astro function not active
• Memory C
- Not factory assigned.
Mo
Di
Mi
Do
Fr
Sa
So
Independent programs can be stored in the three program
memories A, B and C (e.g. for everyday, weekend,
vacations etc.).
Set
s / w
12
Lowering of shutter/blind activated
Raising of shutter/blind activated
Time display
Configuration mode activated
Random function activated
Astro function activated
Minute display
Set day of week
Twilight value underrun
10 Brightness value exceeded
11 Manually execute lowering of shutter/blind
12 Set values
13 Select mode
7
11
14 Manually execute raising of shutter/blind
15 Mode of operation daylight saving time
16 Learn function activated
17 Mode of operation winter time
18 Set date
19 Set time
I2_08808
20 Program memories A/B/C are activated
8
6
10
All three program memories support a maximum of 18 switching
times.
The factory settings can be reset at any time.
Daylight savings
To implement daylight savings, the "Set" button must be briefly
pressed at the appropriate times on the respective dates in
spring and fall.
It can also be used to set whether or not any configured individual
motor runtimes are to be executed.
Operating modes
The Comfort shutter/blind clock can be set to the "automatic" and
"manual" mode. It has three program memories (A, B, C), which
can be alternatively selected in the automatic mode.
• Automatic mode
The set switching times of the program memory A, B or C are
executed. Manual operation is also possible using the / and
2 buttons. A, B or C is shown on the display.
• Manual operation
Manual operation is only possible by means of the / and 2
buttons. The set switching times of the program memories A,
B or C are not executed. A, B or C are not shown on the display.
Automatic mode with program memories A, B, C
In the three program memories, three individual switching time
programs can be generated. By selecting the A, B or C program
memory, the desired switching time program is activated.
By pressing the "Mode" button, it is possible to change between
the program memories (A, B, C) and manual operation.
Manual operation
A manual operation is possible with any operating mode. The
shutters/blinds are raised using the 2 button and lowered using
the / button.
During operation, a distinction is made between short and long
button strokes:
• Short button stroke (< 1 s)
A pulse is generated in accordance with the duration of the
key operation. This function serves to adjust the blind slats.
• Long button stroke (> 1 s)
The shutter/blind control is set to maintained function (continuous
operation). If no other motor runtimes are programmed,
a runtime of approx. 2 min is executed.
19/56 Siemens ET D1 · 10/2010