DELTA Switches and Socket Outlets Catalog ET D1 · 2011 - Sobel.rs

Technical Information
Motion detectors
© Siemens AG 2011
Motion detector triac inserts (5TC1 501)
■ Design
I2_08812
1
2
3
4
Motion detector
Triac insert
Frame
Motion detector top
Plug
The motion detector triac insert $ is mounted in a DIN 49073-
compliant device box.
The terminals of the motion detector triac insert must be directed
downwards (for wall mounting).
Only use the motion detector triac insert in combination with a
motion detector top &. Together with the frame %, the top is
4
3
1
2
plugged onto the insert $. The electrical contacting is achieved
over the plug (.
Load conventional transformers with at least 85 % of the rated
load with lamps.
The total load including the transformer power loss must not exceed
400 W/VA.
Depending on the mounting type, the max. connected load must
be reduced by:
• –10 % each time the ambient temperature of 25 °C is
exceeded by 5 °C,
• –15 % for mounting on wood, Rigips or cavity walls,
• –20 % for mounting in multiple combinations.
Use of extension units
The sensing field of the center unit can be extended by means
of the motion detector extension unit insert.
If mechanical pushbuttons are used (NO contacts), the lighting
can be switched on from several sides irrespective of the current
brightness level.
Note: A motion detector top must be mounted on the center unit
- otherwise, there will be no function.
A mechanical pushbutton insert without a glow lamp and a motion
detector extension unit insert may also be combined.
■ Schematics
5
1 L
1
5TC1 501
L
N
230 V AC 50/60 Hz
5TC1 501
1
2
N1 L
5TC1 502
2
1 L
3
I2_08782a
5TD2 120
1
Motion detector
Triac insert
I2_08783a
2
Load
L N 4
1
2
3
4
5
Motion detector
Triac insert
Motion detector
extension unit insert
Mechanical pushbutton
without a glow lamp
Connection of further
extension units
Load
19
Connection of the motion detector triac insert
Connection of all possible inserts
19/44 Siemens ET D1 · 10/2010