Hardware Interface Description - KORE Telematics
Hardware Interface Description - KORE Telematics
Hardware Interface Description - KORE Telematics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
XT55/56 <strong>Hardware</strong> <strong>Interface</strong> <strong>Description</strong><br />
Confidential / Released<br />
s<br />
Requirements of quality<br />
IEC 60068<br />
Environmental testing<br />
DIN EN 60529 IP codes<br />
Compliance with international rules and regulations<br />
Manufacturers of mobile or fixed devices incorporating XT55/56 modules are advised to have<br />
their completed product tested and approved for compliance with all applicable national and<br />
international regulations. As a tri-band GSM/GPRS engine designed for use on any GSM<br />
network in the world, XT55/56 is required to pass all approvals relevant to operation on the<br />
European and North American markets. For the North American market this includes the<br />
Rules and Regulations of the Federal Communications Commission (FCC) and PTCRB, for<br />
the European market the R&TTE Directives and GCF Certification Criteria must be fully<br />
satisfied.<br />
The FCC Equipment Authorization granted to the XT55/56 Siemens reference application is<br />
valid only for the equipment described in Chapter 8.<br />
SAR requirements specific to portable mobiles<br />
Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM<br />
module must be in accordance with the guidelines for human exposure to radio frequency<br />
energy. This requires the Specific Absorption Rate (SAR) of portable XT55/56 based<br />
applications to be evaluated and approved for compliance with national and/or international<br />
regulations.<br />
Since the SAR value varies significantly with the individual product design manufacturers are<br />
advised to submit their product for approval if designed for portable use. For European and<br />
US markets the relevant directives are mentioned below. It is the responsibility of the<br />
manufacturer of the final product to verify whether or not further standards, recommendations<br />
or directives are in force outside these areas.<br />
Products intended for sale on US markets<br />
ES 59005/ANSI C95.1 Considerations for evaluation of human exposure to Electromagnetic<br />
Fields (EMFs) from Mobile Telecommunication Equipment (MTE) in<br />
the frequency range 30MHz-6GHz<br />
Products intended for sale on European markets<br />
EN 50360<br />
Product standard to demonstrate the compliance of mobile phones<br />
with the basic restrictions related to human exposure to<br />
electromagnetic fields (300 MHz - 3 GHz)<br />
Note: Usage of XT55/56 in a fixed, mobile or portable application is not allowed<br />
without a new FCC certification.<br />
XT55/56_hd_v02.06a Page 17 of 125 17.12.2004
Change language