Каталог Weidmuller: Electronics - Analogue Signal Conditioning

Signal converters and monitoring
components in 6 mm width
MICROSERIES – Overview
MICROSERIES
Thin shape – great functionality
E
The MICROSERIES leads the field in analogue signal
conditioning. It packs much functionality into its thin 6.1 mm
width. The enclosed version of the signal converter is available
with a screw connection (as MAS variants) and with a tension
clamp connection (as MAZ variants). The MICROSERIES
modules measures PT100 signals, thermocouple signals and
DC-current/voltage signals. They then electrically isolate and
convert them into standardised analogue signals.
The DC/DC Select modules are one of the highlights in this
series. These 3-way isolators function to isolate and convert DC
standard signals. A DIP switch can be used to adapt them to
the particular application. The DC/DC Select HI (HIGH) has a
high rated voltage of 300 V.
The RPS/RPSH modules are compact-sized 4...20 mA supply
isolators with 300-V / 3-way isolation and supply for sensors.
The HART ® Transparent RPSH enables HART ® -compatible
sensors to be connected. The MICROINTERFACE Analog
adapter module makes it easier to wire up a facility. There is
no longer any need for the time-consuming and error prone
individual wiring process. A block is constructed of eight
MIRCOSERIES modules and two power supply modules.
This can then be bridged electrically using pluggable ZQV
cross-connectors. The MICROINTERFACE Analog is mounted
and connected to the signal connection terminals (input or
output). Signals are transmitted via the 15-pole SUB-D
connector and connected with pre-fabricated cables.
E.4