Каталог Weidmuller: Electronics - Analogue Signal Conditioning

MICROSERIES – Overview
Signal converters and monitoring
components in 6 mm width
Security
Electrical isolation increases the safety of
operations and reduces the risk of facility
malfunctions.
Simple signal conditioning
The DIP switches on the side can be
used to adapt the sensor signals to the
standard DC signals of 0/4 to 20 mA or
0 to 10 V.
E
Saves space in the electrical cabinet
The high component density allows you
to save more than 50 % of the space on
a DIN rail when compared to standard
widths over 12.5.
Simple wiring
A time-saving cabling system with
MICROINTERFACE; the power supply can
be bridged from one module to the next
using cross-connections.
DC/DC 3-way isolator
The signal isolator is widely configurable
using the DIP switch
Supply isolator
3-way current converter with
sensor supply
PT100 / RTD signal isolator / converter
Temperature transducer
for RTD signals
Thermocouple signal isolator /
converter
Temperature transducer
for thermo signals
MICROINTERFACE analogue
Pluggable adapter for connecting
to system cable
E.5