ÐаÑалог Weidmuller: Electronics - Analogue Signal Conditioning
ÐаÑалог Weidmuller: Electronics - Analogue Signal Conditioning
ÐаÑалог Weidmuller: Electronics - Analogue Signal Conditioning
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Trip amplifier for monitoring<br />
AC/DC circuits<br />
PLUGCONTROL - Threshold monitoring<br />
Relay output<br />
PAS CMR 0.5...2.5 A DC<br />
• Monitoring of currents up to 10 A DC<br />
• For use with valves, servocontrols or DC motors<br />
• Pull-up / pull-down resistor 4.7 kΩ<br />
PAS CMR 2.0...5.0 A DC<br />
14/24<br />
14/24<br />
A1<br />
4.7k<br />
11/21<br />
A1<br />
4.7kΩ<br />
11/21<br />
D<br />
0.5...2.5A DC<br />
A2<br />
100V<br />
0.1A<br />
12/22<br />
2.0...5.0A DC<br />
A2<br />
100V<br />
0.1A<br />
12/22<br />
Technical data<br />
Input<br />
Input current<br />
Max. current<br />
Making current threshold<br />
Resistance of sensor circuit<br />
Secure off<br />
Pulse duration<br />
Output<br />
Switching current<br />
Switching voltage AC / Switching voltage DC<br />
Max. switching frequency<br />
Contact assembly<br />
Contact material<br />
General data<br />
Ambient temperature<br />
Storage temperature<br />
Humidity<br />
Approvals<br />
Insulation coordination<br />
Standards<br />
EMC standards<br />
Rated voltage<br />
Impulse withstand voltage<br />
Insulation voltage<br />
Overvoltage category<br />
Pollution severity<br />
Clearance & creepage distances<br />
0.5...2.5 A DC<br />
7.5 A for 10 s<br />
≤ 500 mA<br />
50 Ω<br />
≤ 50 mA<br />
min. 1 ms<br />
≤ 100 mA<br />
1 V...100 V / 1 V...100 V<br />
15 Hz<br />
1 NO contact<br />
RH/Rd (Reed contact)*<br />
0 °C...+55 °C<br />
-40 °C...+85 °C<br />
5...95 % rel. humidity<br />
T u<br />
= 40°C, no condensation<br />
cULus; CE<br />
EN 50178 (secure separation)<br />
EN 55011, EN 61000-6-1, 2, 3, 4<br />
300 V<br />
6 kV<br />
4 kV eff<br />
/ 1 min.<br />
III<br />
2<br />
≥ 5 mm (grout encapsulated)<br />
2...5.0 A DC<br />
15 A for 10 s<br />
≤ 2 A<br />
50 Ω<br />
≤ 300 mA<br />
min. 1 ms<br />
≤ 100 mA<br />
1 V...100 V / 1 V...100 V<br />
15 Hz<br />
1 NO contact<br />
RH/Rd (Reed contact)*<br />
0 °C...+55 °C<br />
-40 °C...+85 °C<br />
5...95 % rel. humidity<br />
T u<br />
= 40°C, no condensation<br />
cULus; CE<br />
EN 50178 (secure separation)<br />
EN 55011, EN 61000-6-1, 2, 3, 4<br />
300 V<br />
6 kV<br />
4 kV eff<br />
/ 1 min.<br />
III<br />
2<br />
≥ 5 mm (grout encapsulated)<br />
Dimensions<br />
Clamping range (nominal / min. / max.)<br />
Length x width x height<br />
Note<br />
mm²<br />
mm<br />
Screw connection<br />
1.5 / 2.5 / 2.5<br />
92 / 15.3 / 95<br />
* The peak current should be limited to 100mA when under<br />
capacitive loads<br />
Screw connection<br />
1.5 / 2.5 / 2.5<br />
92 / 15.3 / 95<br />
* The peak current should be limited to 100mA when under<br />
capacitive loads<br />
Ordering data<br />
Screw connection<br />
Type Qty. Order No.<br />
PAS CMR 0,5...2,5 A DC 10 8742610000<br />
Type Qty. Order No.<br />
PAS CMR 2,0...5,0 A DC 10 8742620000<br />
Note<br />
Accessories<br />
Cross-connectors and markers - refer to WAVESERIES accessories<br />
Cross-connectors and markers - refer to WAVESERIES accessories<br />
D.8