Каталог Weidmuller: Electronics - Analogue Signal Conditioning

Signal converters and monitoring
components in 6 mm width
MCZ SERIES - DC/DC passive isolator
Input current loop feed
Passive isolator for galvanic isolation of standard
signals from 0/4 to 20 mA. Power is supplied
to the module via the measurement signal, so
that no auxiliary power supply is required. It is
distinguished by its low energy use and its pick-
MCZ CCC
up current of less than 100 µA.
I
I
Technical data
E
Input
Input voltage / Input current
Pick-up current
Voltage drop
Output
Output voltage / Output current
Load impedance, voltage/current
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
General data
Ambient temperature
Storage temperature
Approvals
Insulation coordination
Standards
EMC standards
Insulation voltage
/ 0(4)...20 mA current loop
< 100 µA
2.5....3 V at 20 mA
max. 10 V / 0(4)...20 mA
/ ≤ 500 Ω
< 0.1 % of end value
≤ 50 ppm/K of measured value at 0 Ω load resistance
Approx. 200 kHz
-25 °C...+60 °C
-40 °C...+85 °C
cURus; CSA; CE
EN 60529, EN 61010-1
EN 61000-6
510 V eff
U E [V]
15
12
9
6
3
0
0 100 200 300 400 500 600
R L
Dimensions
Clamping range (nominal / min. / max.)
Length x width x height
Note
mm²
mm
Tension clamp connection
1.5 / 0.5 / 1.5
91 / 6 / 63.2
Ordering data
Tension clamp connection
Type Qty. Order No.
MCZ CCC 0-20mA/0-20mA 10 8411190000
Note
Accessories
Cross-connectors for power supplies and
markers – refer to Accessories
E.20