System description - Pilz GmbH & Co.

Modules
Digital input/output (standard)
PSSu E S 2DOR 10(-T)
Wiring
Front view
][Verdrahtung ST-Ausgang Relais
The actuators may be connected
using unshielded cables.
To prevent contact welding, a fuse
should be connected before the
output contacts (see Technical details).
With inductive loads, sufficient fuse
protection must be provided on all
output contacts.
Use copper wiring.
][Verdrahtung Zusatz mit C
The terminal configuration as stated
on the front plate applies for base
modules with C-rail. The terminal
configuration as stated in the technical
documentation applies for all
other base modules.
TK_Frontansicht
Err
PSSu E S
2DOR 10
312510
000000
001
11 21
O0 O0
12 22
13 23
(C) (C)
14 24
O1 O1
11
14
PSSu E S
2DOR 10
31 41
32 42
33 43
(C) (C)
34 44
3.4
Terminal configuration
][Klemmenbelegung S 2DOR 10
Base module
Screw terminals:
PSSu BP-C 2/16S
PSSu BP-C 2/16S-T
Cage clamp terminals:
PSSu BP-C 2/16C
PSSu BP-C 2/16C-T
Terminal configuration
With C-rail:
11: Output O0
Relay contact 1
21: Output O0
Relay contact 1
12–22: Not connected
11
21
31
41
13–23: C-rail supply
(13-23-33-43 linked within the base module)
12
22
32
42
14 Output O1
Relay contact 2
13
23
33
43
24: Output O1
Relay contact 2
31–41, 32–42: Not connected
14
24 34
44
33–43: C-rail supply
34-44: Not connected
3.4-50
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01