System description - Pilz GmbH & Co.

Modules
Analogue input/output (failsafe)
PSSu E F AI U(-T)
Voltage range
-10.24 ... 10.2375 V
Differential measurement referenced to
earth
In a noise susceptible environment
I0+ 11
21
I0+ 11
21
0 V 12
22
0 V
0 V 12
22
0 V
13
23
13
23
24
I0- 14
I0- 14
24
INFORMATION
To achieve the safety values PL e (Cat.
4) and SIL CL 3, two analogue inputs
will need to be used.
Notice
][Wichtig_PDB
This data sheet is only intended for use
during configuration. Please refer to
the operating manual for installation
and operation.
][Technische Daten PSSu Analoge ST-Ein
Technical details
Application range
Failsafe
Module's device code
0B00h
Number of FS input bits 16
Number of ST status bits 1
Support in system environment A
no
Support in system environment B
from head module FS firmware version 1.0.0
Electrical data
Internal supply voltage (module supply)
Supply voltage range of module supply
4.8 - 5.4 V
Module's current consumption
45 mA
Module's power consumption
0.22 W
Periphery's supply voltage (periphery supply)
Voltage range
16.8 - 30.0 V
Module's current consumption with no load
34 mA
Module's power consumption with no load
0.58 W
Max. power dissipation of the module
0.80 W
Inputs
Number of analogue inputs 1
Type of analogue inputs
Voltage
Input range
-10.24 ... 10.2375 V
Resolution (without sign bit)
13 Bit
Safety-related accuracy (1 input) 5 %
Max. continuous voltage
60 V
Max. common mode voltage
40 V
Input resistance (voltage input)
57 kOhm
3.7
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01
3.7-17