System description - Pilz GmbH & Co.

Modules
Analogue input/output (standard)
PSSu E S 2AI I se(-T)
Connection
][Anschluss ST-AI 2xI
Input circuit Without C-rail With C-rail
Current range 0 ... 20 mA
Current range 4 ... 20 mA
single-pole, referenced to earth
I0
11
21
I1
I0
11
21
I1
0 V 12
22
0 V
0 V 12
22
0 V
13
23
13
23
n.c. 14
24
n.c.
n.c. 14
24
n.c.
Notice
][Wichtig_PDB
This data sheet is only intended for use
during configuration. Please refer to
the operating manual for installation
and operation.
][Technische Daten PSSu Analoge ST-Ein
Technical details
Application range
Standard
Module's device code
0310h
Number of ST input bits 32
Number of ST status bits 16
Support in system environment A
from ST firmware version for other head modules 7
from ST firmware version PSSu H S PN 1
from ST firmware version PSSu WR S IDN 4
Support in system environment B
from head module ST firmware version 1.0.0
Electrical data
Internal supply voltage (module supply)
Supply voltage range of module supply
4.8 - 5.4 V
Module's current consumption
43 mA
Module's power consumption
0.22 W
Periphery's supply voltage (periphery supply)
Voltage range
16.8 - 30.0 V
Module's current consumption with no load
10 mA
Module's power consumption with no load
0.24 W
Max. power dissipation of the module
1.50 W
Inputs
Number of analogue inputs 2
Type of analogue inputs
Current
Input range
0 .. 20 mA, 4 .. 20 mA
Resolution (without sign bit)
12 Bit
Max. continuous current
35 mA
Input resistance (current input)
115.000 Ohm
3.6
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01
3.6-5