System description - Pilz GmbH & Co.

Modules
Voltage distribution
PSSu E PS-P 5V
Base module
Screw terminals:
PSSu BP-C1 1/12S
PSSu BP-C1 1/12S-T
Cage clamp terminals:
PSSu BP-C1 1/12C
PSSu BP-C1 1/12C-T
Terminal configuration
With C-rail:
11-21: 0 V extraction
(11-21 linked internally)
12-22: 0 V infeed
(12-22 linked within the base module)
11
12
21
22
13-23: C-rail supply
(13-23-16-26 linked within the base module)
13
23
14-24: +5 V extraction
(14-24 linked internally)
15-25: +24 V infeed
(15-25 linked within the base module)
14
24
16-26: C-rail supply
(13-23-16-26 linked within the base module)
15
25
16
26
Notice
][Wichtig_PDB
This data sheet is only intended for use
during configuration. Please refer to
the operating manual for installation
and operation.
][Technische Daten PSSu Netzteil
Technical details
3.11
Application range
Standard
Support in system environment A
from FS firmware version for other head modules 1
from ST firmware version for other head modules 1
from FS firmware version PSSu H F PN 1
from ST firmware version PSSu H S PN 1
from ST firmware version PSSu WR S IDN 1
Support in system environment B
from head module FS firmware version 1.0.0
from head module ST firmware version 1.0.0
Electrical data
Primary side (external supply voltage)
Supply voltage U B DC
24 V
Voltage tolerance -30 %/+25 %
Power consumption at U B DC
12.0 W
Secondary side (output voltage)
Output power
10.0 W
Voltage tolerance -2 %/+2 %
Voltage output
5 V
Max. current
2.0 A
Max. power dissipation of the module
1.50 W
3.11-20
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01